Take the course at /learn/path/addressable-leds. It is an intermediate course: it assumes the Uno course.
The lessons
One wire, many lights. A comet on 16 LEDs, with the sketch timing
show() in microseconds: 24 bits an LED in GRB order at 800 kHz, each LED
keeping its own 24 and passing the rest on. A strip longer than the sketch
knows stays dark past the end. Then Adafruit_NeoPixel as a rocket fuel gauge
on a knob, with a launch that drains it.
Color like a pro. FastLED on a 16 LED ring: CHSV and CRGB, a hue byte
that wraps, a spinning rainbow and saturation on a knob. Then palettes: ocean
waves from ColorFromPalette with linear blending, crossfades with
nblendPaletteTowardPalette, and a custom aurora palette.
Panels and power. A 16x8 serpentine panel: XY(), the zigzag of odd
rows, and a pixel-art spaceship over the stars. Then the power budget: 128
LEDs could draw 7680 mA at full white, so the sketch adds up each frame and
limits the brightness to a 500 mA USB port; and power injection for long
strips.
Boss. A reactive light wall: an aurora of green and violet curtains made from FastLED noise rises with the sound level from a KY-038, a clap fires a meteor, and a roaring room turns it into a solar storm.
The bench
Every lesson runs on one bench, the gallery's LED layout on a half-size
breadboard: a knob on A0, a button on pin 2, and a 330 ohm resistor from pin
6 to the LEDs' DIN, with the LEDs powered from the board's 5 V rails. The LEDs
are a 16 LED strip, a 16 LED ring, or a 16x8 serpentine panel (count 128,
layout matrix). The boss adds a KY-038 sound sensor, AO on A1 and DO on
pin 3.
What each sketch does
aledtiming: Adafruit_NeoPixel, 16 LEDs dim blue,show()timed withmicros()(596 us), then a comet with a tail that quarters each step.aledneo: a fuel gauge from the knob, red to green,setBrightness(60), and a launch on the button.aledhsv: FastLED, a CHSV to CRGB table, a rainbow withDELTA_HUE16 spinning on the ring, saturation from the knob.aledpalette: Ocean, Lava, Forest and a custom Aurora palette on the button, crossfaded withMAX_CHANGES24 and the frames counted.aledmatrix:XY()with aSERPENTINEflag, the map printed, a spaceship sprite from strings of color letters.aledpower: white, rainbow and night sky scenes, each frame's current summed at 20 mA a channel and the brightness limited toBUDGET_MA.aledboss: the aurora wall: peak-to-peak swing from 60 samples, the first DO edge for a meteor, andSTORM_COUNTSfor the solar storm.
Honest limits
- The LEDs draw no current in the simulator. The power lesson does the sum a
real build needs, and FastLED's
setMaxPowerInVoltsAndMilliamps()is accepted but limits nothing, so the sketch limits the brightness itself. - Voltage drop along a strip is not modeled: the far end never turns yellow. Power injection is taught, not shown.
- FastLED's CHSV conversion, noise and named palettes are close to upstream, not identical, so colors can differ by a few counts from a real board.
- The KY-038 hears the room level you set on its slider and its clap button, not your computer's microphone. Below about 75 dB its output does not move at all; a real one wobbles by a count or two of its own hiss.
Related
Displays: characters, digits and dots covers LCDs, seven-segment digits and the MAX7219 matrix, and the gallery has many WS2812 projects, from a rainbow arch to a 16x16 rangoli panel.