Four wires: the I2C backpack
The same LCD on a PCF8574 backpack: an I2C bus scan, what an address is, a scrolling marquee from Mars, a walking alien, and what the two wires cost in speed.
Open it in the simulatorMake the Uno show things: a 16x2 LCD on six wires and on an I2C backpack, seven-segment digits by hand, the TM1637, a MAX7219 dot matrix and the HT16K33, then an arcade scoreboard for two players with a high score.
0 of 7 done
7 lessons in 4 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
The same LCD on a PCF8574 backpack: an I2C bus scan, what an address is, a scrolling marquee from Mars, a walking alien, and what the two wires cost in speed.
Open it in the simulatorAn escape room timer on a TM1637: a driver chip that scans the digits for you, MM:SS in one call with a blinking colon, brightness, and DONE spelled in raw segments.
Open it in the simulatorAn HT16K33 four-digit display on the I2C bus beside two sensor chips: three addresses on two wires, a temperature with a degree sign from raw segments, and a warning that blinks.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
Text on a 16x2 LCD, on six wires and then on two.
A 16x2 character LCD on six wires: what RS and E do, four-bit mode, setCursor() counting from zero, a rocket you draw as eight bytes, and a live temperature.
0 of 6 steps
The same LCD on a PCF8574 backpack: an I2C bus scan, what an address is, a scrolling marquee from Mars, a walking alien, and what the two wires cost in speed.
0 of 6 steps
Seven segments by hand, then a chip that drives four.
One bare digit on seven pins: each segment is an LED, a digit is a byte, a font is an array of bytes, and one change makes it count in hex.
0 of 6 steps
An escape room timer on a TM1637: a driver chip that scans the digits for you, MM:SS in one call with a blinking colon, brightness, and DONE spelled in raw segments.
0 of 6 steps
A 64-dot matrix and an I2C digit display.
An 8x8 LED matrix on a MAX7219: a row is a byte written in binary, a picture is eight of them, and two pictures in turn make a space invader march.
0 of 5 steps
An HT16K33 four-digit display on the I2C bus beside two sensor chips: three addresses on two wires, a temperature with a degree sign from raw segments, and a warning that blinks.
0 of 5 steps
An arcade scoreboard for a two-player button mash duel.
Button Mash Duel: two players, a start button, the live score on an HT16K33, the countdown and the winner on an I2C LCD, both on one bus, and a high score saved in EEPROM.
0 of 7 steps
All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 7 lessons of Displays: characters, digits and dots are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 5 hours: 7 lessons in 4 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Four wires: the I2C backpack, Four digits on two wires: TM1637 and Digits on the bus: HT16K33.
With "Sixteen characters, two rows", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.