Lessons and the learning game

Build a music visualizer

Sound turned into light on an Uno: levels, a fixed-point FFT in octave bands, beat detection, spectrum bars on an LED matrix and a party wall.

The visualizer

Every lesson opens on the same wiring:

  • The line in: two signal generators, a bass note at 125 Hz and a treble note at 1250 Hz, both riding on 2.5 V and mixed through two 10k resistors into A0.
  • The microphone: a KY-038 sound module on A1, for claps and beats.
  • The lights: a 16 x 8 WS2812 panel on pin 6.
  • THEME: a pushbutton on pin 2.

The catalog lists an ESP32 with an INMP441 I2S microphone. The Uno has no I2S, and the simulated INMP441 gives a level rather than a waveform to transform, so this build samples an analog line in on the Uno's own ADC.

How it works

Levels. 64 samples, 250 microseconds apart: 4000 a second. RMS says how loud a passage is, the peak catches claps and drums. The KY-038 has no amplifier, so ordinary sound moves the ADC by a count or two: it is a clap detector, and the music comes in on the line in.

The FFT. A 64 point radix 2 FFT in 16 bit whole numbers, each stage halving its results so nothing overflows. Each bin is 62.5 Hz up to the 2000 Hz Nyquist limit; a 3000 Hz tone aliases to 1000 Hz. The 32 bins become 8 bands that double in width, an octave each, at 4 dB a LED.

Beats. A block of microphone sound more than three times the running average is a beat, with a 250 ms lockout. The gaps between beats give the tempo.

Bars and themes. Eight bands two columns wide, with peak dots that fall a LED every 150 ms. Themes color each LED by its height (fire, ocean) or its column (rainbow), at low brightness: a full white panel would draw over 7 A.

The party wall. Everything at once, plus an auto gain that scales the loudest band to fill the panel but never boosts more than 8 times.

The course

Build a music visualizer gets there in six lessons, each a sketch on the same wiring:

  1. Microphone levels: RMS, peaks, and a microphone with no amplifier.
  2. Bands with FFT: bins, octave bands and aliasing.
  3. Beat flash: beats and tempo.
  4. Matrix bars: a spectrum analyzer on the panel.
  5. Color themes: fire, ocean and rainbow.
  6. Project: a party wall: all of it, with auto gain.

Every step but the last is checked against the running circuit.