NeoPixel basics: a fuel gauge
Adafruit_NeoPixel as a rocket fuel gauge: setPixelColor, Color, setBrightness and show, a bar from red to green on a knob, and a launch that drains it.
Open it in the simulatorWS2812B strips, rings and panels on the Uno: the one-wire timing, NeoPixel basics, FastLED with HSV and palettes, mapping a serpentine matrix, power budgets and injection, and a sound-reactive aurora wall for the boss.
0 of 7 done
7 lessons in 4 chapters, about 6 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
Adafruit_NeoPixel as a rocket fuel gauge: setPixelColor, Color, setBrightness and show, a bar from red to green on a knob, and a launch that drains it.
Open it in the simulatorOcean waves from a 16-color palette with linear blending, a button that crossfades to lava, forest and a custom aurora palette, and how many frames a blend takes.
Open it in the simulatorWhy 128 LEDs could pull 7.7 A from a 500 mA port: adding up a frame, limiting the brightness to a budget, sizing a supply, and injecting power along a long strip.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
How the WS2812B signal works, and the NeoPixel library.
How sixteen LEDs share one data wire: 24 bits each in GRB order at 800 kHz, each LED keeping its own and passing the rest on, and what show() costs in microseconds.
0 of 7 steps
Adafruit_NeoPixel as a rocket fuel gauge: setPixelColor, Color, setBrightness and show, a bar from red to green on a knob, and a launch that drains it.
0 of 6 steps
FastLED, hue and saturation, palettes and smooth blends.
FastLED on a 16 LED ring: CRGB and CHSV, hue as one byte that wraps by itself, a spinning rainbow, and saturation on a knob from vivid down to white.
0 of 6 steps
Ocean waves from a 16-color palette with linear blending, a button that crossfades to lava, forest and a custom aurora palette, and how many frames a blend takes.
0 of 6 steps
Folding a strip into a matrix, and feeding it safely.
A 16x8 panel is one long strip folded into rows: an XY() function, the zigzag of a serpentine panel, and a pixel-art spaceship flying over the stars.
0 of 6 steps
Why 128 LEDs could pull 7.7 A from a 500 mA port: adding up a frame, limiting the brightness to a budget, sizing a supply, and injecting power along a long strip.
0 of 6 steps
A light wall that dances to the room.
An aurora light wall that listens: green and violet curtains over the stars that climb with the sound level from a KY-038, and a meteor on every clap.
0 of 8 steps
All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 7 lessons of Addressable LEDs: strips and matrices are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 6 hours: 7 lessons in 4 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: NeoPixel basics: a fuel gauge, Palettes and blending and Power budget and injection.
With "WS2812 timing: one wire, many lights", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.