Intermediate Arduino and ESP32 projects
An intermediate project adds a library, a display or a sensor bus like I2C or SPI, and code split into functions. Mokxi has 389 projects at this level. Here are 24, picked across boards and topics. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.
How to pick your first one
- Start with “BME280 on a Pi Zero 2 W with smbus2”, an intermediate project that needs a BME280 sensor.
- Arduino Uno runs 258 of them, ESP32 50 and Raspberry Pi Pico 38. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the LED (100 projects), the push button (81) and the potentiometer (48). With those on hand, most of this list is open to you.
- Read the sketch before you run it and guess what the serial monitor will print; checking that guess is how the next level starts.
24 projects of 389

MicroPython alarm on a Pico: a siren on a passive buzzer
MicroPython on a Raspberry Pi Pico: while the button on GP16 is held, PWM on GP15 sweeps a passive buzzer between 1 and 2 kHz like a siren.
- Board
- Raspberry Pi Pico
- Parts
- Resistor, transistor, piezo speaker, push button
- Level
- Intermediate

Flappy Bird on an OLED
Flappy Bird on an OLED with an Arduino: one button to flap through the pipes, gravity in whole numbers, sound on a piezo and the best score in EEPROM.
- Board
- Arduino Uno R3
- Parts
- Arcade button, piezo speaker, SSD1306 OLED display
- Level
- Intermediate

ESP32 DHT22 weather web server
ESP32 DHT22 weather web server: the board serves its own page with the temperature in C and F and the humidity, plus the same reading as JSON.
- Board
- ESP32 DevKit V1
- Parts
- DHT11 or DHT22 sensor
- Level
- Intermediate

Pico W four-digit display counts seconds
MicroPython on a Pico W: a 74HC595 on GP18 to GP20 and digit selects on GP10 to GP13 multiplex a four-digit display that counts the seconds.
- Board
- Raspberry Pi Pico W
- Parts
- 74HC595 shift register, four-digit seven-segment display, resistor
- Level
- Intermediate

555 on the bench
A 555 astable with a scope on its output and its timing capacitor and a multimeter reading the average: the frequency.
- Board
- No board
- Parts
- Resistor, NE555 timer, capacitor, oscilloscope, multimeter
- Level
- Intermediate

Sound-reactive LED strip
A KY-038 microphone and sixteen WS2812Bs on an ESP32-C3: a VU meter with a falling peak dot, and colors that turn with every loud beat.
- Board
- ESP32-C3-DevKitM-1
- Parts
- Sound sensor, WS2812 NeoPixel LEDs
- Level
- Intermediate

Fight stick on a Pro Micro
A four-way lever and six buttons on a Pro Micro, debounced with no added delay and reported as a numpad direction plus the buttons held.
- Board
- SparkFun Pro Micro
- Parts
- Game console buttons, arcade button
- Level
- Intermediate

Four-digit display on a 74HC595 (pins 8, 10 and 9)
A 74HC595 with data on pin 8, clock on 10 and latch on 9 drives the segments of a four-digit display whose digits are all switched on.
- Board
- Arduino Uno R3
- Parts
- 74HC595 shift register, four-digit seven-segment display, resistor
- Level
- Intermediate

JK flip-flop counter
Two JK flip-flops in a 74HC112 toggle on each falling clock edge and count 0 to 3 in binary on two LEDs.
- Board
- No board
- Parts
- Clock, 74HC112 dual JK flip-flop, resistor, LED
- Level
- Intermediate

Animated diorama: DFPlayer sound + stepper
A button plays a C-3PO line on a DFPlayer Mini while a 28BYJ-48 turns R2-D2’s dome.
- Board
- Arduino Nano
- Parts
- DFPlayer Mini MP3 module, resistor, push button, 8 ohm speaker, 28BYJ-48 stepper and ULN2003
- Level
- Intermediate

HC-SR04 distance sensor with gpiozero
gpiozero DistanceSensor on a Raspberry Pi 5: an HC-SR04 with its echo divided down to 3.3 V.
- Board
- Raspberry Pi 5
- Parts
- HC-SR04 ultrasonic sensor, resistor, LED
- Level
- Intermediate

SSD1306 OLED on a Pi with smbus2
A Raspberry Pi 4 draws text on an SSD1306 OLED over I2C bus 1 with smbus2: an uptime counter each second, and how long each frame takes at 100 kHz.
- Board
- Raspberry Pi 4 Model B
- Parts
- SSD1306 OLED display
- Level
- Intermediate

BME280 on a Pi Zero 2 W with smbus2
A Raspberry Pi Zero 2 W reads a BME280 over I2C with smbus2 and the datasheet formulas: temperature, pressure and humidity every two seconds.
- Board
- Raspberry Pi Zero 2 W
- Parts
- BME280 weather sensor
- Level
- Intermediate

Rainbow strip
An ESP32-C3 runs a hue wheel along sixteen WS2812Bs, bit-banged to the datasheet pulse widths.
- Board
- ESP32-C3-DevKitM-1
- Parts
- WS2812 NeoPixel LEDs
- Level
- Intermediate

An ESP32 and an Arduino Uno talking over serial
An ESP32 reads a knob and sends the number to an Arduino Uno over a serial wire; the Uno sets an LED’s brightness from it.
- Board
- ESP32 DevKit V1 and Arduino Uno R3
- Parts
- Potentiometer, resistor, LED
- Level
- Intermediate

Stream deck on a Pro Micro
Six keys with their labels drawn on an SSD1306 OLED, a second page on the sixth key, and a Ctrl+Shift+F-key hotkey for each press through Keyboard.h.
- Board
- SparkFun Pro Micro
- Parts
- SSD1306 OLED display, arcade button
- Level
- Intermediate

ESP-NOW on two NodeMCUs
Two ESP8266 boards talking ESP-NOW with the ESP8266 core’s espnow.h: one sends a count and a knob reading every two seconds.
- Board
- ESP8266 NodeMCU V1.0
- Parts
- Potentiometer
- Level
- Intermediate

LED and key
A TM1638 LED&KEY board with the TM1638plus library: each button lights its LED, and the display counts the presses.
- Board
- Arduino Uno R3
- Parts
- LED and key board
- Level
- Intermediate

LM393 night light with a ULN2003A
An LM393 compares an LDR with a knob, its open-collector output pulled up by 10 k.
- Board
- No board
- Parts
- Photoresistor, resistor, potentiometer, LM393 dual comparator, ULN2003A Darlington array, +1 more
- Level
- Intermediate

Drum pads
Arduino drum pads: three force-sensing resistors play a kick, a snare and a hi-hat on a piezo, harder hits longer.
- Board
- Arduino Nano
- Parts
- Force-sensing resistor, piezo speaker
- Level
- Intermediate

Grove OLED
The 1.12 inch 128x128 SH1107 OLED with Adafruit’s SH110X library on a Mega: a ball bounces around the square, sent as sixteen pages of RAM.
- Board
- Arduino Mega 2560 R3
- Parts
- OLED display
- Level
- Intermediate

WiFi: fetch the weather
HTTPClient against a simulated origin, with the numbers on a dial in the Cloud panel, and a request to the real internet that is refused.
- Board
- ESP32-C3-DevKitM-1
- Parts
- Just the board
- Level
- Intermediate

I2C LCD clock and thermometer
An I2C LCD on A4 and A5 shows the time, kept by a timer interrupt every second, and the temperature from a thermistor on A0.
- Board
- Arduino Uno R3
- Parts
- 10k NTC thermistor, resistor, I2C LCD
- Level
- Intermediate

TL072 amplifier on +-12 V
A TL072 inverting amplifier with a gain of -4.7 on a +12 V and -12 V supply: a 1 V sine in, a 4.7 V sine out, upside down and both sides of ground.
- Board
- No board
- Parts
- Function generator, TL072 dual JFET op-amp, resistor, oscilloscope
- Level
- Intermediate
Wiring, libraries and more ideas
Wiring guides
Library pages
More project ideas
- Arduino Uno project ideas
- ESP32 project ideas
- Raspberry Pi Pico project ideas
- Electronics projects with no code
- Projects with an arcade button
- LED projects for Arduino, ESP32 and Pico
- Projects with a piezo speaker
- Projects with a potentiometer
- OLED display projects
- Projects with a 74HC595 shift register
- Projects with a push button
- Projects with a four-digit seven-segment display