Projects with a four-digit seven-segment display
13 Mokxi projects use a four-digit seven-segment display (5 intermediate and 8 advanced). They run on Arduino Uno, Raspberry Pi Pico and ESP32 boards. Here are all of them, from “Pico W four-digit display counts seconds” to “MicroPython four-digit display, multiplexed”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.
How to pick your first one
- Start with “Four-digit display on a 74HC595 (pins 8, 10 and 9)”, an intermediate project that needs a 74HC595 shift register, a four-digit seven-segment display and a resistor.
- Arduino Uno runs 7 of them, Raspberry Pi Pico 5 and ESP32 1. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the 74HC595 shift register (10 projects), the buzzer (2) and the LED (2). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the four-digit seven-segment display part page for its pins and what each one does.
13 projects ready to run

Pico W four-digit display counts seconds
MicroPython on a Pico W: a 74HC595 on GP18 to GP20 and digit selects on GP10 to GP13 multiplex a four-digit display that counts the seconds.
- Board
- Raspberry Pi Pico W
- Parts
- 74HC595 shift register, four-digit seven-segment display, resistor
- Level
- Intermediate

Four-digit display on a 74HC595 (pins 8, 10 and 9)
A 74HC595 with data on pin 8, clock on 10 and latch on 9 drives the segments of a four-digit display whose digits are all switched on.
- Board
- Arduino Uno R3
- Parts
- 74HC595 shift register, four-digit seven-segment display, resistor
- Level
- Intermediate

Pico W ten-second game with a tilt switch
MicroPython on a Pico W: shake a tilt switch on GP16 to start and stop a stopwatch on a four-digit display; stop it on exactly 10.00 to win.
- Board
- Raspberry Pi Pico W
- Parts
- 74HC595 shift register, four-digit seven-segment display, resistor, tilt switch
- Level
- Intermediate

Pico W passenger counter: PIR and four digits
MicroPython on a Pico W: each time a PIR sensor on GP16 sees someone, a pin interrupt adds one to the count on a four-digit display.
- Board
- Raspberry Pi Pico W
- Parts
- 74HC595 shift register, four-digit seven-segment display, resistor, PIR motion sensor
- Level
- Intermediate

Pico W traffic light with a countdown display
MicroPython on a Pico W: green, yellow and red LEDs on GP7, GP8 and GP9 change on a 30, 5 and 30 second cycle, counted down on four digits.
- Board
- Raspberry Pi Pico W
- Parts
- 74HC595 shift register, four-digit seven-segment display, resistor, LED
- Level
- Intermediate

Stopwatch on a four-digit display
A four-digit display wired straight to the Uno, segments a to dp on pins 2 to 9 and digits 1 to 4 on pins 13 to 10.
- Board
- Arduino Uno R3
- Parts
- Four-digit seven-segment display, resistor
- Level
- Advanced

Four-digit counter
A bare four-digit seven-segment display on twelve pins, multiplexed: one digit at a time, four milliseconds each, and the eye sees all four.
- Board
- Arduino Uno R3
- Parts
- Four-digit seven-segment display, resistor
- Level
- Advanced

MicroPython four-digit display on a Pico, multiplexed
MicroPython on a Raspberry Pi Pico: a 74HC595 sets the segments and GP17 to GP14 pick the digit, fast enough that a 4-digit display reads 0123.
- Board
- Raspberry Pi Pico
- Parts
- 74HC595 shift register, resistor, four-digit seven-segment display
- Level
- Advanced

Alarm clock with a timer on a four-digit display
A DS1307 keeps the time on a four-digit display driven by a 74HC595 (8, 13, 12).
- Board
- Arduino Uno R3
- Parts
- 74HC595 shift register, four-digit seven-segment display, resistor, push button, RGB LED, +3 more
- Level
- Advanced

Countdown timer on a four-digit display
A kitchen timer: a 74HC595 (pins 8, 13 and 12) and four digit lines on pins 2 to 5 show minutes and seconds.
- Board
- Arduino Uno R3
- Parts
- 74HC595 shift register, four-digit seven-segment display, resistor, push button, LED, +2 more
- Level
- Advanced

Four digits from one 74HC595 (pins 11, 12, 13 and 7 to 4)
A four-digit common-anode display: a 74HC595 (DS 11, ST_CP 12, SH_CP 13) sets the segments and pins 7, 6, 5 and 4 pick the digit.
- Board
- Arduino Uno R3
- Parts
- 74HC595 shift register, four-digit seven-segment display, resistor
- Level
- Advanced

Stopwatch: four-digit display, digits on 10 to 13
A four-digit seven-segment display with segments a to dp on pins 2 to 9 and digits 1 to 4 on pins 10 to 13 counts minutes and seconds.
- Board
- Arduino Uno R3
- Parts
- Four-digit seven-segment display, resistor
- Level
- Advanced

MicroPython four-digit display, multiplexed
MicroPython on an ESP32: a 74HC595 on GPIO 15, 2 and 4 sets the segments, GPIO 25, 26, 27 and 14 pick the digit, and 0123 is multiplexed.
- Board
- ESP32-DevKitC V4
- Parts
- 74HC595 shift register, four-digit seven-segment display, resistor
- Level
- Advanced
Wiring, libraries and more ideas
Library pages
More project ideas
- Arduino Uno project ideas
- Raspberry Pi Pico project ideas
- ESP32 project ideas
- Projects with a 74HC595 shift register
- Projects with a buzzer
- LED projects for Arduino, ESP32 and Pico
- Projects with a push button
- Projects with a DHT11 or DHT22 sensor
- Projects with a DS1307 real-time clock
- Projects with a PIR motion sensor