Project ideas by level

Advanced Arduino and ESP32 projects

An advanced project combines several parts, timing that matters, or more than one board talking to another. Mokxi has 142 projects at this level. Here are 24, picked across boards and topics. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

How to pick your first one

  • Start with “Console”, an advanced project that needs a handheld console.
  • Arduino Uno runs 87 of them, ESP32 19 and Raspberry Pi Pico 13. Start on the board you have, or on an Arduino Uno if you are buying one.
  • The parts used most here are the push button (42 projects), the LED (37) and the piezo speaker (32). With those on hand, most of this list is open to you.
  • Build an advanced project in stages. Get each part working on its own in a copy of the circuit, then join them.
Projects

24 projects of 142

  • Mixbox-style controller on a Pico, drawn in the Mokxi editor

    Mixbox-style controller on a Pico

    W A S D directions for the left hand and eight lit buttons for the right, on GP2040-CE’s Pico pins, with SOCD modes, turbo and an OLED input display.

    Board
    Raspberry Pi Pico
    Parts
    SSD1306 OLED display, arcade button, LED arcade button
    Level
    Advanced
    Open in the simulator
  • Claw machine controller, drawn in the Mokxi editor

    Claw machine controller

    Steer the claw over a prize in the cabinet with the joystick, then press Drop: the winch lowers it, the servo claw grabs.

    Board
    Arduino Uno R3
    Parts
    L293D motor driver, arcade button, claw machine cabinet, joystick
    Level
    Advanced
    Open in the simulator
  • Console, drawn in the Mokxi editor

    Console

    Snake and Breakout on a handheld cabinet: a 128x64 OLED over I2C and eight buttons to ground, with a menu on the D-pad.

    Board
    ESP32-C3-DevKitM-1
    Parts
    Handheld console
    Level
    Advanced
    Open in the simulator
  • Full adder, drawn in the Mokxi editor

    Full adder

    Three 74HC chips add two bits and a carry, with the sum and carry on LEDs.

    Board
    No board
    Parts
    Slide switch, 74HC86 quad XOR, 74HC08 quad AND, 74HC32 quad OR, resistor, +1 more
    Level
    Advanced
    Open in the simulator
  • Solar sensor node, drawn in the Mokxi editor

    Solar sensor node

    A 6 V panel charges an 18650 through a TP4056, an MCP1700 makes 3.3 V, and a Pro Mini reports temperature, humidity.

    Board
    Arduino Pro Mini, 3.3 V 8 MHz
    Parts
    Arduino Pro Mini, solar panel, li-ion charger, battery: AA, voltage regulator, +2 more
    Level
    Advanced
    Open in the simulator
  • Pinball table, drawn in the Mokxi editor

    Pinball table

    A table you can play on a Mega: flippers, pop bumpers on a kicker solenoid, targets, a drain beam and a plunger, with a four-digit score.

    Board
    Arduino Mega 2560 R3
    Parts
    TM1637 four-digit display, WS2812 NeoPixel LEDs, pinball table, MOSFET, diode, +3 more
    Level
    Advanced
    Open in the simulator
  • A smile and scrolling digits on an 8x8 matrix (74HC595 rows, pins 2 to 9 columns), drawn in the Mokxi editor

    A smile and scrolling digits on an 8x8 matrix (74HC595 rows, pins 2 to 9 columns)

    A common-anode 8x8 LED matrix: a 74HC595 (DS 11, ST_CP 12, SH_CP 13) drives its rows through 220 ohm resistors and pins 2 to 9 its columns.

    Board
    Arduino Uno R3
    Parts
    74HC595 shift register, LED matrix, resistor
    Level
    Advanced
    Open in the simulator
  • Sim racing button box, drawn in the Mokxi editor

    Sim racing button box

    Two encoders, an ignition key with a start button, three toggles, four buttons and three LEDs on a Pro Micro, sent to the game as one USB controller.

    Board
    SparkFun Pro Micro
    Parts
    Slide switch, arcade button, KY-040 rotary encoder, LED, resistor
    Level
    Advanced
    Open in the simulator
  • OLED pong on an ESP32-C3, drawn in the Mokxi editor

    OLED pong on an ESP32-C3

    Thumb-stick pong on an ESP32-C3 and an OLED: a twelve-bit ADC moves the paddle and the score is drawn in digits.

    Board
    ESP32-C3-DevKitM-1
    Parts
    SSD1306 OLED display, joystick
    Level
    Advanced
    Open in the simulator
  • Camera slider with eased moves, drawn in the Mokxi editor

    Camera slider with eased moves

    A NEMA 17 on an A4988 homes to an end switch, then makes a video move that speeds up and slows down evenly, or a timelapse that moves.

    Board
    Arduino Nano
    Parts
    LED, resistor, potentiometer, push button, slide switch, +3 more
    Level
    Advanced
    Open in the simulator
  • MicroPython web server on a Pico W: switch the LED, drawn in the Mokxi editor

    MicroPython web server on a Pico W: switch the LED

    MicroPython on a Raspberry Pi Pico W: a socket server on port 80 serves a page with ON and OFF links that switch the board’s own LED.

    Board
    Raspberry Pi Pico W
    Parts
    Just the board
    Level
    Advanced
    Open in the simulator
  • Stopwatch on a four-digit display, drawn in the Mokxi editor

    Stopwatch on a four-digit display

    A four-digit display wired straight to the Uno, segments a to dp on pins 2 to 9 and digits 1 to 4 on pins 13 to 10.

    Board
    Arduino Uno R3
    Parts
    Four-digit seven-segment display, resistor
    Level
    Advanced
    Open in the simulator
  • Tetris on LED matrices, drawn in the Mokxi editor

    Tetris on LED matrices

    Tetris on LED matrices with an Arduino Mega: two 8x8 MAX7219s make an 8 by 16 field, with four buttons, all seven pieces.

    Board
    Arduino Mega 2560 R3
    Parts
    MAX7219 8x8 LED matrix, arcade button, piezo speaker
    Level
    Advanced
    Open in the simulator
  • Binary counter, drawn in the Mokxi editor

    Binary counter

    Two 74HC74s divide a 4 Hz clock four times and count a four-bit number up a row of LEDs.

    Board
    No board
    Parts
    Clock, 74HC74 dual flip-flop, resistor, LED
    Level
    Advanced
    Open in the simulator
  • Desk buddy robot, drawn in the Mokxi editor

    Desk buddy robot

    Animated robot eyes on a round GC9A01: it blinks and glances about, beams when you stroke it, gets dizzy when rocked and lonely when ignored.

    Board
    ESP32-C3-DevKitM-1
    Parts
    GC9A01 round display, MPU6050 accelerometer and gyro, touch sensor, photoresistor module, piezo speaker
    Level
    Advanced
    Open in the simulator
  • Key matrix numpad, drawn in the Mokxi editor

    Key matrix numpad

    Twelve switches in a 4 x 3 matrix with a diode on every key, three layers, an encoder and per-key RGB on a Pro Micro, typed as a USB keyboard.

    Board
    SparkFun Pro Micro
    Parts
    Push button, diode, KY-040 rotary encoder, WS2812 NeoPixel LEDs
    Level
    Advanced
    Open in the simulator
  • Spaceship control panel, drawn in the Mokxi editor

    Spaceship control panel

    Arm three systems, pass the go/no-go poll, lift the safety and launch.

    Board
    Arduino Mega 2560 R3
    Parts
    Slide switch, LED arcade button, TM1637 four-digit display, piezo speaker, WS2812 NeoPixel LEDs, +7 more
    Level
    Advanced
    Open in the simulator
  • Mini G-code plotter, drawn in the Mokxi editor

    Mini G-code plotter

    A two-axis plotter that reads G28, G0, G1, G90, G91 and M114 from the Serial Monitor.

    Board
    Arduino Uno R3
    Parts
    A4988 stepper driver, NEMA 17 stepper motor, limit switch
    Level
    Advanced
    Open in the simulator
  • Leverless controller on a Pico, drawn in the Mokxi editor

    Leverless controller on a Pico

    A full leverless build on GP2040-CE’s Pico pins: SOCD and D-pad or stick modes on button combos, turbo.

    Board
    Raspberry Pi Pico
    Parts
    SSD1306 OLED display, arcade button, LED arcade button
    Level
    Advanced
    Open in the simulator
  • ESP32-C3 Simon, drawn in the Mokxi editor

    ESP32-C3 Simon

    Four LEDs flash a growing sequence, four buttons play it back.

    Board
    ESP32-C3-DevKitM-1
    Parts
    Resistor, LED, push button
    Level
    Advanced
    Open in the simulator
  • Autopilot and landing gear panel, drawn in the Mokxi editor

    Autopilot and landing gear panel

    An autopilot knob for heading, altitude and vertical speed on a four-digit display, an AP button.

    Board
    SparkFun Pro Micro
    Parts
    TM1637 four-digit display, KY-040 rotary encoder, slide switch, arcade button, LED, +1 more
    Level
    Advanced
    Open in the simulator
  • Pico W MFRC522 reads and writes RFID cards, drawn in the Mokxi editor

    Pico W MFRC522 reads and writes RFID cards

    MicroPython on a Pico W: an MFRC522 on SPI0 reads a card’s UID and the text stored on it, and writes text typed in the Serial Monitor to a card.

    Board
    Raspberry Pi Pico W
    Parts
    MFRC522 RFID reader
    Level
    Advanced
    Open in the simulator
  • Snake, drawn in the Mokxi editor

    Snake

    Snake on a 240x320 TFT with a thumb stick: eat the apple, grow, and repaint only the squares that moved.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, joystick, piezo speaker
    Level
    Advanced
    Open in the simulator
  • Up/down counter, drawn in the Mokxi editor

    Up/down counter

    A slide switch and a 74HC02 steer a clock into a 74HC193, which counts up or down in binary on four LEDs.

    Board
    No board
    Parts
    Clock, slide switch, resistor, 74HC02 quad NOR, 74HC193 up/down counter, +1 more
    Level
    Advanced
    Open in the simulator

See all 142 advanced projects on the templates page