Project ideas by part

NeoPixel projects

51 Mokxi projects use NeoPixel LEDs (24 beginner, 15 intermediate and 12 advanced). They run on Arduino Uno, ESP32 and Raspberry Pi Pico boards. Here are 24, from “MicroPython NeoPixels on a Pico: 8 LEDs on GP16” to “Key matrix numpad”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

How to pick your first one

  • Start with “CircuitPython NeoPixel rainbow on a Pico”, a beginner project that needs NeoPixel LEDs.
  • Arduino Uno runs 30 of them, ESP32 10 and Raspberry Pi Pico 7. Start on the board you have, or on an Arduino Uno if you are buying one.
  • The parts used most here are the push button (16 projects), the piezo speaker (14) and the potentiometer (8). With those on hand, most of this list is open to you.
  • Before you build one on a real bench, read the WS2812 NeoPixel LEDs wiring guide for your board below. It gives every pin and the voltage notes.
Projects

24 projects of 51

  • MicroPython NeoPixels on a Pico: 8 LEDs on GP16, drawn in the Mokxi editor

    MicroPython NeoPixels on a Pico: 8 LEDs on GP16

    MicroPython on a Raspberry Pi Pico: the neopixel module fills an 8 LED WS2812 module on GP16 with red, green, blue and white, one LED at a time.

    Board
    Raspberry Pi Pico
    Parts
    WS2812 NeoPixel LEDs
    Level
    Beginner
    Open in the simulator
  • Tree topper star, drawn in the Mokxi editor

    Tree topper star

    A WS2812B ring behind a star cutout tops the tree: warm twinkle, a gold comet, a slow rainbow and a red and green chase, one press of a button each.

    Board
    Arduino Uno R3
    Parts
    Push button, resistor, WS2812 NeoPixel LEDs
    Level
    Beginner
    Open in the simulator
  • CircuitPython NeoPixel rainbow on a Pico, drawn in the Mokxi editor

    CircuitPython NeoPixel rainbow on a Pico

    CircuitPython on a Raspberry Pi Pico: Adafruit’s neopixel library turns a rainbow around eight WS2812 LEDs on GP16, sent by the Pico’s PIO.

    Board
    Raspberry Pi Pico
    Parts
    WS2812 NeoPixel LEDs
    Level
    Beginner
    Open in the simulator
  • Love meter, drawn in the Mokxi editor

    Love meter

    Hold a TMP36 between your fingers and a bar of ten WS2812B LEDs fills from pink to red with your warmth.

    Board
    Arduino Uno R3
    Parts
    TMP36 temperature sensor, resistor, WS2812 NeoPixel LEDs
    Level
    Beginner
    Open in the simulator
  • Lunar New Year lantern, drawn in the Mokxi editor

    Lunar New Year lantern

    A ring of WS2812B LEDs inside a red paper lantern glows red with flickers of gold like a candle, and a light sensor turns it on at dusk.

    Board
    Arduino Uno R3
    Parts
    Photoresistor module, resistor, WS2812 NeoPixel LEDs
    Level
    Beginner
    Open in the simulator
  • Tug of war game, drawn in the Mokxi editor

    Tug of war game

    Tug of war game for two players on a 15-LED NeoPixel strip: every button press pulls the light one LED your way, and the first to pull it off wins.

    Board
    Arduino Nano
    Parts
    Arcade button, WS2812 NeoPixel LEDs, piezo speaker
    Level
    Beginner
    Open in the simulator
  • ESP32-C6 rainbow, drawn in the Mokxi editor

    ESP32-C6 rainbow

    A hue wheel on the DevKitC-1's own RGB LED and seven more, bit-banged on GPIO 8.

    Board
    ESP32-C6-DevKitC-1
    Parts
    WS2812 NeoPixel LEDs
    Level
    Beginner
    Open in the simulator
  • MicroPython NeoPixel: eight WS2812 LEDs on GPIO 2, drawn in the Mokxi editor

    MicroPython NeoPixel: eight WS2812 LEDs on GPIO 2

    MicroPython on an ESP32: the neopixel module fills a strip of eight WS2812 LEDs on GPIO 2 one by one in red, green, blue and white.

    Board
    ESP32-DevKitC V4
    Parts
    WS2812 NeoPixel LEDs
    Level
    Beginner
    Open in the simulator
  • LED sparkler, drawn in the Mokxi editor

    LED sparkler

    Press the button to light a stick of 16 WS2812B LEDs.

    Board
    Arduino Uno R3
    Parts
    Push button, resistor, WS2812 NeoPixel LEDs
    Level
    Beginner
    Open in the simulator
  • Stop the light game, drawn in the Mokxi editor

    Stop the light game

    Stop the light game on a Raspberry Pi Pico: press the button as a red light runs onto the green LED of a 16-LED NeoPixel ring, faster every level.

    Board
    Raspberry Pi Pico
    Parts
    WS2812 NeoPixel LEDs, arcade button, piezo speaker
    Level
    Beginner
    Open in the simulator
  • Hanukkah menorah, drawn in the Mokxi editor

    Hanukkah menorah

    Nine flickering WS2812B lights, eight candles and the shamash: each press is the next night, the shamash lights first and then tonight’s candles.

    Board
    Arduino Uno R3
    Parts
    Push button, resistor, WS2812 NeoPixel LEDs
    Level
    Beginner
    Open in the simulator
  • Pico W WS2812 strip of eight on GP0, drawn in the Mokxi editor

    Pico W WS2812 strip of eight on GP0

    MicroPython on a Pico W: the neopixel module gives each of eight WS2812 pixels on GP0 its own color, then turns the colors along the strip.

    Board
    Raspberry Pi Pico W
    Parts
    WS2812 NeoPixel LEDs
    Level
    Beginner
    Open in the simulator
  • Distance rainbow, drawn in the Mokxi editor

    Distance rainbow

    A Sharp GP2Y0A21 measures a hand from 10 to 80 cm and a WS2812 stick lights up from green to red as it comes closer.

    Board
    Arduino Uno R3
    Parts
    IR distance sensor, WS2812 NeoPixel LEDs
    Level
    Beginner
    Open in the simulator
  • Rainbow strip, drawn in the Mokxi editor

    Rainbow strip

    An ESP32-C3 runs a hue wheel along sixteen WS2812Bs, bit-banged to the datasheet pulse widths.

    Board
    ESP32-C3-DevKitM-1
    Parts
    WS2812 NeoPixel LEDs
    Level
    Intermediate
    Open in the simulator
  • Sound-reactive LED strip, drawn in the Mokxi editor

    Sound-reactive LED strip

    A KY-038 microphone and sixteen WS2812Bs on an ESP32-C3: a VU meter with a falling peak dot, and colors that turn with every loud beat.

    Board
    ESP32-C3-DevKitM-1
    Parts
    Sound sensor, WS2812 NeoPixel LEDs
    Level
    Intermediate
    Open in the simulator
  • Holi color catcher, drawn in the Mokxi editor

    Holi color catcher

    Hold anything colorful to a TCS34725 sensor and a strip of eight WS2812B LEDs catches its color.

    Board
    Arduino Uno R3
    Parts
    Color sensor, resistor, WS2812 NeoPixel LEDs
    Level
    Intermediate
    Open in the simulator
  • Arcade button lighting, drawn in the Mokxi editor

    Arcade button lighting

    Four arcade buttons on an ESP32-C3, each lighting its own pair of WS2812B LEDs the moment it is pressed and fading out when it is let go.

    Board
    ESP32-C3-DevKitM-1
    Parts
    WS2812 NeoPixel LEDs, arcade button
    Level
    Intermediate
    Open in the simulator
  • Haunted window, drawn in the Mokxi editor

    Haunted window

    A WS2812B strip across a window throws lightning in bursts of flashes while four LEDs on the sill flicker like candles.

    Board
    Arduino Uno R3
    Parts
    Potentiometer, resistor, WS2812 NeoPixel LEDs
    Level
    Intermediate
    Open in the simulator
  • Rangoli lights, drawn in the Mokxi editor

    Rangoli lights

    A 16x16 WS2812B panel draws glowing rangoli patterns for Diwali, each symmetric eight ways from the center.

    Board
    Arduino Uno R3
    Parts
    Push button, resistor, WS2812 NeoPixel LEDs
    Level
    Intermediate
    Open in the simulator
  • Ring Simon, drawn in the Mokxi editor

    Ring Simon

    Simon on a sixteen-LED ring with a rotary encoder: turn the knob to the color you were shown and press the shaft.

    Board
    ESP32-C3-DevKitM-1
    Parts
    WS2812 NeoPixel LEDs, KY-040 rotary encoder
    Level
    Advanced
    Open in the simulator
  • Pico W RFID music player with a WS2812 strip, drawn in the Mokxi editor

    Pico W RFID music player with a WS2812 strip

    MicroPython on a Pico W: lay an RFID card on an MFRC522 and the notes stored on it play on a passive buzzer while a WS2812 strip flashes a color per.

    Board
    Raspberry Pi Pico W
    Parts
    MFRC522 RFID reader, WS2812 NeoPixel LEDs, piezo speaker, transistor, resistor
    Level
    Advanced
    Open in the simulator
  • Plasma panel, drawn in the Mokxi editor

    Plasma panel

    Three sine waves drift across a 16x16 WS2812B matrix, 256 LEDs on one wire from an ESP32-C3.

    Board
    ESP32-C3-DevKitM-1
    Parts
    WS2812 NeoPixel LEDs
    Level
    Advanced
    Open in the simulator
  • Pinball table, drawn in the Mokxi editor

    Pinball table

    A table you can play on a Mega: flippers, pop bumpers on a kicker solenoid, targets, a drain beam and a plunger, with a four-digit score.

    Board
    Arduino Mega 2560 R3
    Parts
    TM1637 four-digit display, WS2812 NeoPixel LEDs, pinball table, MOSFET, diode, +3 more
    Level
    Advanced
    Open in the simulator
  • Key matrix numpad, drawn in the Mokxi editor

    Key matrix numpad

    Twelve switches in a 4 x 3 matrix with a diode on every key, three layers, an encoder and per-key RGB on a Pro Micro, typed as a USB keyboard.

    Board
    SparkFun Pro Micro
    Parts
    Push button, diode, KY-040 rotary encoder, WS2812 NeoPixel LEDs
    Level
    Advanced
    Open in the simulator