Projects with a light sensor module
14 Mokxi projects use a light sensor module (10 beginner, 1 intermediate and 3 advanced). They run on Arduino Uno, ESP32 and Arduino Mega boards. Here are all of them, from “Dusk switch” to “Mars rover”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.
How to pick your first one
- Start with “Dusk switch”, a beginner project that needs a light sensor module.
- Arduino Uno runs 10 of them, ESP32 3 and Arduino Mega 1. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the LED (5 projects), the piezo speaker (4) and the WS2812 NeoPixel LEDs (4). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the photoresistor module part page for its pins and what each one does.
14 projects ready to run

Dusk switch
A photoresistor sensor module turns a lamp on at dusk: its comparator output switches the LED, and its analog output shows the light.
- Board
- Arduino Uno R3
- Parts
- Photoresistor module
- Level
- Beginner

Lunar New Year lantern
A ring of WS2812B LEDs inside a red paper lantern glows red with flickers of gold like a candle, and a light sensor turns it on at dusk.
- Board
- Arduino Uno R3
- Parts
- Photoresistor module, resistor, WS2812 NeoPixel LEDs
- Level
- Beginner

Photocell module on A0
A photoresistor module’s analog output on A0, printed twice a second: more light, a different number. Drag the light level and watch it change.
- Board
- Arduino Uno R3
- Parts
- Photoresistor module
- Level
- Beginner

Light-seeking robot
A two-wheel robot with a photoresistor module on each front corner.
- Board
- Arduino Uno R3
- Parts
- L298N motor driver, 2WD robot car chassis, photoresistor module
- Level
- Beginner

Plant sensor for Home Assistant
A capacitive soil sensor mapped between two calibration readings, a light level, and a thirsty LED with two thresholds so it does not flicker.
- Board
- ESP32-C3-DevKitM-1
- Parts
- Photoresistor module, capacitive soil moisture sensor, resistor, LED
- Level
- Beginner

Crescent and star lantern
Ten LEDs of a WS2812B ring glow as a warm crescent moon beside a twinkling LED star, and a light sensor lights the lantern at dusk.
- Board
- Arduino Uno R3
- Parts
- Photoresistor module, resistor, WS2812 NeoPixel LEDs, LED
- Level
- Beginner

Lights-out reminder
A PIR and a light sensor notice when a room is lit and nobody has moved for a while.
- Board
- Arduino Uno R3
- Parts
- PIR motion sensor, photoresistor module, resistor, LED, piezo speaker
- Level
- Beginner

Egg hunt finder
A hot and cold finder for glowing eggs hidden in a dim room: a light sensor measures the change.
- Board
- Arduino Uno R3
- Parts
- Photoresistor module, resistor, WS2812 NeoPixel LEDs, piezo speaker
- Level
- Beginner

Kind words night light
When the room goes dark a ring of WS2812B LEDs fades up to soft amber and a 16x2 LCD shows a kind note.
- Board
- Arduino Uno R3
- Parts
- Photoresistor module, push button, resistor, WS2812 NeoPixel LEDs, I2C LCD
- Level
- Beginner

PIR motion light with a relay
After dark, an HC-SR501 PIR switches a 12 V lamp on through a relay, and it goes off 20 s after the last movement; a light sensor keeps it off by day.
- Board
- Arduino Uno R3
- Parts
- PIR motion sensor, photoresistor module, relay module, DC jack and adapter, filament lamp
- Level
- Beginner

Radar hallway sensor
An RCWL-0516 radar holds a hallway "occupied" for ten seconds after the last movement and lights the lamp only when it is dark.
- Board
- ESP32-C3-DevKitM-1
- Parts
- Photoresistor module, microwave motion sensor, resistor, LED
- Level
- Intermediate

Desk buddy robot
Animated robot eyes on a round GC9A01: it blinks and glances about, beams when you stroke it, gets dizzy when rocked and lonely when ignored.
- Board
- ESP32-C3-DevKitM-1
- Parts
- GC9A01 round display, MPU6050 accelerometer and gyro, touch sensor, photoresistor module, piezo speaker
- Level
- Advanced

Escape-room puzzle box
Five puzzles in ten minutes: a keypad code, a magnet key, the right RFID card, a tilt sequence and three flashes of light.
- Board
- Arduino Mega 2560 R3
- Parts
- 4x4 keypad, reed switch, piezo speaker, MPU6050 accelerometer and gyro, servo motor, +6 more
- Level
- Advanced

Mars rover
A rover that drives three waypoints by dead reckoning, steers around hazards it sees with a sonar mast, samples soil and light.
- Board
- Arduino Uno R3
- Parts
- L298N motor driver, 2WD robot car chassis, push button, SSD1306 OLED display, VL53L0X time-of-flight sensor, +3 more
- Level
- Advanced