Projects with a thermistor
13 Mokxi projects use a 10k NTC thermistor (2 beginner, 7 intermediate and 4 advanced). They run on Arduino Uno, Raspberry Pi Pico and ESP32 boards. Here are all of them, from “Pico W thermistor thermometer on GP28” to “Water heater thermostat”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.
How to pick your first one
- Start with “Pico W thermistor thermometer on GP28”, a beginner project that needs a resistor and a thermistor.
- Arduino Uno runs 8 of them, Raspberry Pi Pico 4 and ESP32 1. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the I2C LCD (4 projects), the filament lamp (2) and the LED (2). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the 10k NTC thermistor part page for its pins and what each one does.
13 projects ready to run

Pico W thermistor thermometer on GP28
MicroPython on a Pico W: a 10k thermistor divider on GP28, its resistance turned into Celsius and Fahrenheit with the beta equation, once a second.
- Board
- Raspberry Pi Pico W
- Parts
- Resistor, 10k NTC thermistor
- Level
- Beginner

Thermometer: a thermistor on A0
A thermistor and a 10k resistor in a divider on A0: the sketch works out the thermistor’s resistance and turns it into degrees with the beta.
- Board
- Arduino Uno R3
- Parts
- 10k NTC thermistor, resistor
- Level
- Beginner

Thermistor thermometer
A 10k thermistor and a 10k resistor make a divider on A0, and the beta equation turns the reading into degrees on a 16x2 LCD.
- Board
- Arduino Uno R3
- Parts
- 10k NTC thermistor, resistor, 16x2 character LCD
- Level
- Intermediate

Temperature alarm: thermistor on A0, RGB on 10, 11 and 12
A thermistor in a divider on A0 reads the temperature; an RGB LED (red 10, green 11, blue 12) shows blue when it is cold.
- Board
- Arduino Uno R3
- Parts
- RGB LED, resistor, 10k NTC thermistor
- Level
- Intermediate

MicroPython thermometer: a thermistor on GPIO 36
MicroPython on an ESP32: a 10k NTC thermistor in a divider on GPIO 36, turned into degrees Celsius with the beta equation every second.
- Board
- ESP32-DevKitC V4
- Parts
- Resistor, 10k NTC thermistor
- Level
- Intermediate

Thermometer on an I2C LCD
A 10 k NTC bead in a divider on A0, the temperature on a 16x2 character LCD over its PCF8574 backpack. Four wires to the display.
- Board
- Arduino Uno R3
- Parts
- 10k NTC thermistor, resistor, I2C LCD
- Level
- Intermediate

I2C LCD clock and thermometer
An I2C LCD on A4 and A5 shows the time, kept by a timer interrupt every second, and the temperature from a thermistor on A0.
- Board
- Arduino Uno R3
- Parts
- 10k NTC thermistor, resistor, I2C LCD
- Level
- Intermediate

MicroPython thermometer on a Pico: thermistor on GP26
MicroPython on a Raspberry Pi Pico: a 10k NTC thermistor and a 10k resistor on GP26, and the B equation, print the temperature every second.
- Board
- Raspberry Pi Pico
- Parts
- Resistor, 10k NTC thermistor
- Level
- Intermediate

Pico W room temperature on an I2C LCD
MicroPython on a Pico W: a 10k thermistor divider on GP28 gives the temperature, and an I2C LCD1602 on GP6 and GP7 shows it every second.
- Board
- Raspberry Pi Pico W
- Parts
- I2C LCD, resistor, 10k NTC thermistor
- Level
- Intermediate

Pico W web server sets an RGB LED
MicroPython on a Pico W: a socket server on port 80 serves a page whose links set an RGB LED on GP13 to GP15 and that shows a thermistor’s.
- Board
- Raspberry Pi Pico W
- Parts
- Resistor, 10k NTC thermistor, RGB LED
- Level
- Advanced

Plant monitor: light, soil, temperature and a pump
A photoresistor on A0, a soil moisture sensor on A1 and a thermistor on A2 report to an I2C LCD; when the soil dries out.
- Board
- Arduino Uno R3
- Parts
- Photoresistor, resistor, 10k NTC thermistor, L293D motor driver, capacitive soil moisture sensor, +2 more
- Level
- Advanced

Heated bed PID
A 100k thermistor, a MOSFET heater and a PID loop holding a modeled bed at its target.
- Board
- Arduino Uno R3
- Parts
- Resistor, 10k NTC thermistor, MOSFET, filament lamp, slide switch, +1 more
- Level
- Advanced

Water heater thermostat
A thermistor, a setpoint knob and an SSR-switched lamp for the element: an 8 F hysteresis band plus a latched high-limit cutout.
- Board
- Arduino Uno R3
- Parts
- 10k NTC thermistor, resistor, potentiometer, push button, LED, +3 more
- Level
- Advanced