Projects with an L9110S motor driver
7 Mokxi projects use an L9110S motor driver (2 beginner, 4 intermediate and 1 advanced). They run on Arduino Uno and Raspberry Pi Pico boards, and 1 needs no board at all. Here are all of them, from “Pico W water pump on a motor driver” to “Wheel-encoder square driver”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.
How to pick your first one
- Start with “Pico W water pump on a motor driver”, a beginner project that needs an L9110S motor driver and a water pump.
- Arduino Uno runs 4 of them, Raspberry Pi Pico 2 and 1 needs no board at all. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the DC motor (4 projects), the I2C LCD (2) and the piezo speaker (2). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the L9110S motor driver part page for its pins and what each one does.
7 projects ready to run

Pico W water pump on a motor driver
MicroPython on a Pico W: GP14 high and GP15 low keep a small DC water pump running through a two-input motor driver.
- Board
- Raspberry Pi Pico W
- Parts
- L9110S motor driver, mini water pump
- Level
- Beginner

L9110 motor by hand
An L9110S module, a motor, a four-AA pack and two switches, no board: each output follows its input, and equal inputs brake.
- Board
- No board
- Parts
- Slide switch, L9110S motor driver, DC motor, battery: AA
- Level
- Beginner

Dosing pump
A peristaltic pump on an encoder gear motor and an L9110S: press the button and it pumps exactly 5 ml.
- Board
- Arduino Uno R3
- Parts
- Push button, L9110S motor driver, gear motor with encoder, battery: AA
- Level
- Intermediate

Pico W fan motor both ways on a motor driver
MicroPython on a Pico W: GP14 and GP15 drive a DC motor through a two-input motor driver, a second forward, a stop, a second backward.
- Board
- Raspberry Pi Pico W
- Parts
- L9110S motor driver, DC motor
- Level
- Intermediate

Ticket redemption counter
Stop the running light in the middle to win tickets, watch a motor pay them out one by one with a sensor counting each.
- Board
- Arduino Uno R3
- Parts
- Arcade button, piezo speaker, L9110S motor driver, DC motor, battery: AA, +2 more
- Level
- Intermediate

Washing machine
Pick a cycle on the knob and press START: it fills, washes with a reversing drum, drains and spins, and it only spins with the lid shut and locked.
- Board
- Arduino Uno R3
- Parts
- Servo motor, two-channel relay board, solenoid, mini water pump, L9110S motor driver, +6 more
- Level
- Intermediate

Wheel-encoder square driver
A two-wheel robot that counts pulses from a slot sensor on each wheel.
- Board
- Arduino Uno R3
- Parts
- L9110S motor driver, 2WD robot car chassis
- Level
- Advanced