Kitronik Discovery Kit for Raspberry Pi Pico: what you can build
Every project in Mokxi that the parts in the Kitronik Discovery Kit for Raspberry Pi Pico can build, from a first blink up, and the few parts to add for more. Open any of them in the editor with no account.
Not affiliated with Kitronik. Lesson titles are referenced so you can follow along.
Everything the Kitronik Discovery Kit for Raspberry Pi Pico can build
12 projects use only the parts in this box, ordered from a first blink to the hardest.
Beginner (11)
- MicroPython blink on the Pico’s own LED, GP25
- MicroPython on a Pico: import a module of your own
- MicroPython serial print on a Pico: seconds since start
- CircuitPython button on a Pico
- MicroPython blink on a Pico, LED on GP15
- MicroPython breathing LED on a Pico, PWM on GP15
- Pico chaser
- CircuitPython blink on a Pico
- MicroPython button on GP13 lights an LED on GP15
- MicroPython table lamp on a Pico: a button toggles an LED
- Pico button
Intermediate (1)
Add a few parts, unlock more projects
The smallest shopping lists that open the most new projects for the Kitronik Discovery Kit for Raspberry Pi Pico.
Add Potentiometer
Add Potentiometer and Addressable RGB LEDs
Add Ultrasonic ranger, Potentiometer and Addressable RGB LEDs
Projects that combine two kits
Own another kit as well? These need parts from both boxes, and neither can build them alone.
The kit’s parts, and what plays them here
The parts in the Kitronik Discovery Kit for Raspberry Pi Pico, by the names its maker gives them. Each one is in the editor’s parts panel.
- Raspberry Pi Pico board Raspberry Pi Pico Comes with its pin headers fitted.
- Large Prototype Breadboard Full-size breadboard
- Red, Yellow and Green 5mm LED (2 of each) LED
- 330Ω Resistor (10) Resistor
- Piezo Element Buzzer Piezo speaker
- Male to Male Jumper Wires (20) Wires are drawn between pins in the editor.
- Push Switches (2) Pushbutton
- Booklet guide Printed guide with seven experiments; nothing to place.
Parts list read from Kitronik’s product page. An item with no part beside it has no match in the editor yet.
A link and a QR code for this page
Print either one beside a lesson, or tape it inside the box lid. Both open this page.
mokxi.com/k/kitronik-discovery
The code is black on white with a quiet border, so it prints and scans at any size from 2 cm up.
Download the QR code (SVG)Make kits? See what we offer kit makers.
Questions about this page
Is this made by Kitronik?
No. Mokxi is independent and is not affiliated with Kitronik. The page follows the kit’s lessons so you can use the two side by side; the circuits, sketches and explanations are Mokxi’s own.
Do I need the kit?
No. Every lesson that runs here runs in the browser, so you can try them before you buy a kit, or keep going while a part is missing or broken.
Is the code the same as in my manual?
The pins and the parts are the same, and the sketches use the same libraries where the kit does. The code itself is written for this page, with comments that explain each step, so it will not match the manual line for line.
What do "with a change" and "coming soon" mean?
A lesson marked "with a change" runs, but something differs from the kit, and the note under it says exactly what. "Coming soon" means we cannot simulate that lesson yet, and the note says why. We do not mark a lesson as running unless it does.
Is it free?
Yes. Every lesson on this page opens with no account. A free account saves your own copies of the circuits.
Other kits
Companion pages for more starter kits.
Start with the first project
Every project opens in the editor with no account and nothing to install. Run it, change a number, run it again.