Project ideas by part

Projects with a MAX7219 LED matrix

14 Mokxi projects use a MAX7219 LED matrix (4 beginner, 5 intermediate and 5 advanced). They run on Arduino Uno, Arduino Mega and ESP32 boards. Here are all of them, from “MAX7219 8x8 matrix (pins 12, 10 and 11)” to “Grid sequencer”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

How to pick your first one

  • Start with “MAX7219 8x8 matrix (pins 12, 10 and 11)”, a beginner project that needs a MAX7219 LED matrix.
  • Arduino Uno runs 12 of them, Arduino Mega 1 and ESP32 1. Start on the board you have, or on an Arduino Uno if you are buying one.
  • The parts used most here are the piezo speaker (4 projects), the push button (3) and the arcade button (2). With those on hand, most of this list is open to you.
  • Before you build one on a real bench, read the MAX7219 8x8 LED matrix wiring guide for your board below. It gives every pin and the voltage notes.
Projects

14 projects ready to run

  • MAX7219 8x8 matrix (pins 12, 10 and 11), drawn in the Mokxi editor

    MAX7219 8x8 matrix (pins 12, 10 and 11)

    An 8x8 LED matrix on a MAX7219 module with DIN on pin 12, CLK on 10 and CS on 11: LedControl draws a smile, a frown and a heart in turn.

    Board
    Arduino Uno R3
    Parts
    MAX7219 8x8 LED matrix
    Level
    Beginner
    Open in the simulator
  • Light-up Valentine heart, drawn in the Mokxi editor

    Light-up Valentine heart

    A heart on an 8x8 MAX7219 LED matrix beats lub-dub, a big heart and a small one, at a pace you set with a knob.

    Board
    Arduino Uno R3
    Parts
    Potentiometer, MAX7219 8x8 LED matrix
    Level
    Beginner
    Open in the simulator
  • Hatching chick, drawn in the Mokxi editor

    Hatching chick

    An egg on an 8x8 MAX7219 matrix wobbles, cracks three times and hatches into a chick that blinks and peeps on a piezo.

    Board
    Arduino Uno R3
    Parts
    Push button, piezo speaker, MAX7219 8x8 LED matrix
    Level
    Beginner
    Open in the simulator
  • MAX7219 scrolling text display, drawn in the Mokxi editor

    MAX7219 scrolling text display

    A 4-in-1 MAX7219 LED matrix scrolls a message right to left with MD_Parola. Type a new one in the serial monitor and it takes over on the next pass.

    Board
    Arduino Uno R3
    Parts
    MAX7219 8x8 LED matrix
    Level
    Beginner
    Open in the simulator
  • Matrix ball, drawn in the Mokxi editor

    Matrix ball

    An Arduino Uno bounces a dot around an 8x8 LED matrix on a MAX7219, three wires and eight registers.

    Board
    Arduino Uno R3
    Parts
    MAX7219 8x8 LED matrix
    Level
    Intermediate
    Open in the simulator
  • Tilt snake on an 8x8 matrix, drawn in the Mokxi editor

    Tilt snake on an 8x8 matrix

    Tip an MPU-6050 on A4 and A5 to steer a snake round an 8x8 MAX7219 matrix (DIN 13, CLK 7, CS 8): eat the blinking dot to grow.

    Board
    Arduino Uno R3
    Parts
    MAX7219 8x8 LED matrix, MPU6050 accelerometer and gyro
    Level
    Intermediate
    Open in the simulator
  • Tilt maze, drawn in the Mokxi editor

    Tilt maze

    Tilt an ADXL335 and a dot rolls around an 8x8 LED matrix, through a little maze to the blinking goal, then the maze changes.

    Board
    Arduino Uno R3
    Parts
    Accelerometer, MAX7219 8x8 LED matrix
    Level
    Intermediate
    Open in the simulator
  • Catch the beans: a tilt game on an 8x8 matrix, drawn in the Mokxi editor

    Catch the beans: a tilt game on an 8x8 matrix

    Tip an MPU-6050 to slide a cup along a MAX7219 matrix (DIN 13, CLK 7, CS 8) and catch the falling beans.

    Board
    Arduino Uno R3
    Parts
    RGB LED, resistor, MAX7219 8x8 LED matrix, MPU6050 accelerometer and gyro, piezo speaker
    Level
    Intermediate
    Open in the simulator
  • Tilt dice on an 8x8 matrix, drawn in the Mokxi editor

    Tilt dice on an 8x8 matrix

    Shake the tilt switch on pin 2 and an 8x8 MAX7219 matrix (DIN 13, CLK 7, CS 8) rolls a die and settles on a number, while an RGB LED on pins 9.

    Board
    Arduino Uno R3
    Parts
    RGB LED, resistor, tilt switch, MAX7219 8x8 LED matrix
    Level
    Intermediate
    Open in the simulator
  • Stacker, drawn in the Mokxi editor

    Stacker

    The arcade stacker game on two cascaded MAX7219 matrices: the row slides, the button drops it, the overhang is cut off.

    Board
    ESP32-C3-DevKitM-1
    Parts
    Arcade button, MAX7219 8x8 LED matrix
    Level
    Advanced
    Open in the simulator
  • Snake on two matrices, drawn in the Mokxi editor

    Snake on two matrices

    An 8x16 play field on two MAX7219 modules, steered with a thumb stick: eat the apple, grow, and do not hit a wall or yourself.

    Board
    Arduino Uno R3
    Parts
    MAX7219 8x8 LED matrix, joystick
    Level
    Advanced
    Open in the simulator
  • Tetris on LED matrices, drawn in the Mokxi editor

    Tetris on LED matrices

    Tetris on LED matrices with an Arduino Mega: two 8x8 MAX7219s make an 8 by 16 field, with four buttons, all seven pieces.

    Board
    Arduino Mega 2560 R3
    Parts
    MAX7219 8x8 LED matrix, arcade button, piezo speaker
    Level
    Advanced
    Open in the simulator
  • Game of Life, drawn in the Mokxi editor

    Game of Life

    Conway's Game of Life on a 32x8 LED sign that wraps round at the edges: draw cells with a thumb stick, run or pause, pour in a random soup.

    Board
    Arduino Uno R3
    Parts
    MAX7219 8x8 LED matrix, joystick, push button
    Level
    Advanced
    Open in the simulator
  • Grid sequencer, drawn in the Mokxi editor

    Grid sequencer

    An 8-step melody sequencer on an 8x8 LED matrix: a dot per step, its height the pitch.

    Board
    Arduino Uno R3
    Parts
    MAX7219 8x8 LED matrix, push button, piezo speaker, potentiometer
    Level
    Advanced
    Open in the simulator