Import

Bring your project to Mokxi

Mokxi opens projects from Wokwi, Tinkercad Circuits, Fritzing, KiCad, LTspice, the Arduino IDE and GitHub in your browser, wired and ready to run, with a report of anything that did not come across. Paste a link, paste some code, or drop a file, a folder or a zip.

Paste from ChatGPT or ClaudeCopy a prompt, say what to build, paste the answer.
  1. 1Copy the promptIt teaches your AI how to write a Mokxi project.
  2. 2Say what to buildPaste the prompt into ChatGPT, Claude, Gemini or Cursor and add what you want, like "a night light with a light sensor".
  3. 3Paste its answer hereThe whole reply is fine. It opens wired and ready to run.

Only have a photo or a screenshot of the circuit? Give your AI the picture with this prompt instead.

Your AI app supports MCP? Add the Mokxi server and it builds the link for you. How

From Tinkercad? Three stepsBring a circuit across wired, with its code.
  1. 1Export the circuitIn Tinkercad, open the circuit, press Export and download the .brd file. It has every part and wire.
  2. 2Download the codeOpen Code, switch to Text and press the download button for the .ino.
  3. 3Drop both hereChoose or drop the .brd and the .ino together: it opens wired, with the code on the board. No .brd? Paste the Component List with the code under it.

Mokxi works out where it came from and opens it in the editor, running. Wokwi, GitHub, Fritzing, SimulIDE, CircuitJS, Tinkercad, PlatformIO, Arduino.

Faster still: type mokxi.com/ in front of a Wokwi or GitHub link in the address bar. How it works

Code from an AI chat? Paste the whole reply: Mokxi finds the sketch in it, picks the board and wires the parts it names. Run AI-written code

Answering a forum post? Help someone fix their code: paste it, see it wired and running, and copy a reply with the fix and a link.

Formats

What comes across.

Run code from an AI chat

Paste the reply from ChatGPT, Claude, Gemini, Copilot or any other assistant, prose and all. Mokxi takes the code out of it, guesses the board from the includes and the pins, wires the parts the code names and opens the editor ready to run, with no account needed. A link that starts mokxi.com/app/#code= opens a sketch the same way.

Import your Wokwi project

Paste a public project link, or type mokxi.com/ in front of it in the address bar, or drop diagram.json with the sketch, or the project zip. A public link is fetched from wokwi.com by our server. Boards, LEDs, resistors, buttons, servos, LCDs, OLEDs, NeoPixels, sensors, keypads and shift registers map to the matching Mokxi part, with their values and pins, and a part plugged into a Wokwi breadboard lands in the same holes.

Import from GitHub

Paste a link to a public repository, a folder in one, a single .ino file or a gist. A PlatformIO project or an Arduino sketch folder comes across with its code and libraries list. Our server fetches it from GitHub only, public repositories only, size capped.

Import from Arduino Cloud, Project Hub or Hackster

Paste a public Arduino Cloud share link, an Arduino Project Hub page or a Hackster project page. Our server reads the sketch files a shared Cloud sketch holds, and the code blocks, attached .ino, .zip and .fzz files and GitHub links on a Project Hub or Hackster page, from those sites only, size capped. A private Cloud sketch needs the Share button set to public first, or download it and drop the zip here.

Import your Fritzing project

Drop the .fzz. The breadboard view comes across: the core parts (Arduino Uno, Nano and Mega, resistors, LEDs, buttons, pots, sensors, the 555, the 74HC595 and more) where they stood, every wire, and the code from the Code tab. Breadboard strips become wires that join the same pins. The schematic and PCB views are not read.

Import your SimulIDE circuit

Drop the .sim1 or .simu file, with the sketch beside it. Components, positions, wires, nodes and tunnels come across. SimulIDE loads a compiled .hex, which Mokxi cannot run, so the .ino is what brings the code.

Import your Falstad CircuitJS circuit

Paste a CircuitJS link (the circuit is inside the link, so nothing is fetched) or the text from Export As Text. Resistors, capacitors, inductors, sources, diodes, LEDs, transistors, MOSFETs, op-amps, pots, switches, the 555 and logic gates become Mokxi parts; anything else becomes a labeled note.

Import your PlatformIO project

Drop the folder or a zip with platformio.ini. The board comes from the default environment, src/main.cpp becomes the sketch, lib_deps are checked against the libraries Mokxi builds with, and lib/ comes along as the project’s own libraries.

Import your Arduino IDE sketch

Drop an .ino, a sketch folder or a zip, or paste the code. Mokxi guesses the board from the includes and the pins the sketch uses, you pick from the list, and the project starts with that board on the canvas for you to wire.

What does not come across

A part Mokxi does not have yet comes in as a generic block with its name and its real pins, labeled imported, not simulated, so every wire to it is kept. Every report names each part, connection, file and library it could not bring, with the reason.

Your own libraries

A libraries folder in the zip (or a PlatformIO lib folder) comes across as the project’s own libraries, on every plan, checked by the same rules as an upload in the editor.

Safety

Nothing you import is run while it is read. Zips and pasted text are size capped, paths that climb out of the project are refused and named, XML that declares entities is refused, and only source and project files are kept.

Three steps

Import your Tinkercad project

Tinkercad Circuits can export a circuit as a .brd board file, which holds every part and every wire. With its code beside it, the whole project comes across, wired. Mokxi never reads Tinkercad’s pages.

  1. In Tinkercad, open the circuit, press Export and download the .brd file.
  2. Open Code, switch to Text and download the code (the .ino), or select all of it and copy it.
  3. Drop the .brd and the .ino into the box above together. The parts arrive wired as Tinkercad had them, with their values, and the code goes on the board. No .brd? Paste the Component List and the code instead, and the parts arrive in rows for you to wire.
Export

Taking a project out again

Nothing locks a project in. The editor’s Export menu downloads it as a Wokwi project (diagram.json, sketch.ino and libraries.txt), an Arduino IDE sketch folder, or a PlatformIO project, each as a zip with a README that says what changed on the way.

Questions

Questions about importing.

Can I import a Wokwi project?

Yes. Paste its Wokwi link, or drop its diagram.json and sketch or its zip: the parts, wiring, sketch and tabs come across, and a report lists anything that did not map.

Can I import from Tinkercad Circuits?

Yes. In Tinkercad, press Export and download the .brd file, download the code from the Code panel in Text mode, and drop both here: the circuit opens wired with the sketch on the board. A Tinkercad link cannot be opened, because projects sit behind a sign-in.

Do I need an account to import?

No. An imported project opens and runs in the editor with no account. Sign in when you want to save it.

Can I take a project out again?

Yes. The editor’s Export menu writes a Wokwi project zip, and a circuit can be exported as a KiCad schematic.