Qucs schematic viewer online: open a .sch from Qucs, Qucs-S or QucsStudio
Open a Qucs .sch file online: drop it here.
Drop it here, or paste it
Mokxi reads its <Components> and <Wires> sections, places each R, C, L, source, diode, BJT and MOSFET where Qucs had it, mirrored and turned the same way, and joins the wires end to end. Qucs-S and QucsStudio write the same format and are read alike. What opens is a circuit you can probe, not a picture of one.
The helloworld schematic from the Qucs examples: a 1 V, 1 Hz AC source feeding a 50 Ω resistor into a 1 mF capacitor to ground, between two Port symbols. It opens with the generator, resistor and capacitor joined and the two ports as notes, since a port is a subcircuit terminal rather than a part.
Paste from ChatGPT or ClaudeCopy a prompt, say what to build, paste the answer.
- 1Copy the promptIt teaches your AI how to write a Mokxi project.
- 2Say what to buildPaste the prompt into ChatGPT, Claude, Gemini or Cursor and add what you want, like "a night light with a light sensor".
- 3Paste its answer hereThe whole reply is fine. It opens wired and ready to run.
Only have a photo or a screenshot of the circuit? Give your AI the picture with this prompt instead.
Your AI app supports MCP? Add the Mokxi server and it builds the link for you. How
From Tinkercad? Three stepsBring a circuit across wired, with its code.
- 1Export the circuitIn Tinkercad, open the circuit, press Export and download the .brd file. It has every part and wire.
- 2Download the codeOpen Code, switch to Text and press the download button for the .ino.
- 3Drop both hereChoose or drop the .brd and the .ino together: it opens wired, with the code on the board. No .brd? Paste the Component List with the code under it.
What Mokxi reads from Qucs
A .sch whose first line is <Qucs Schematic ...>, from Qucs or Qucs-S.
A .sch whose first line is <QucsStudio Schematic ...>, read as a Qucs file with a note that components QucsStudio added on its own are notes.
The file's text pasted into the box.
Not a KiCad legacy .sch or a gEDA .sch, which share the extension: Mokxi tells them apart by the first line and hands each to its own reader.
What comes across
Components, by model
R, C, L, GND, Vdc, Vac, Diode, BJT (three- and four-pin), MOSFET (three- and four-pin), IProbe and VProbe have their pins on file. A resistor keeps its value in ohms, a capacitor in farads and an inductor in henries, with Qucs's prefixes read (1 kOhm, 1e-3, 10n; m is milli and M mega). Vdc becomes a DC source and Vac a sine generator with its amplitude and frequency.
Pins from Qucs's own source
The file never says where a component's pins are. The importer copies each model's Ports from the Qucs component sources (resistor.cpp, bjt.cpp, mosfet_sub.cpp and the rest) and mirrors and turns them as Schematic::loadComponent does, a quarter turn at a time, with the sources already turned once as Qucs builds them. So a mirrored, rotated transistor meets its wires.
Wires and labels
Qucs splits a wire wherever something joins it, so wires and pins meet only end to end, and nets are built here on that rule. A wire label names its node, and two labels with the same text are one net.
Diodes and transistors by kind
A Diode's last property says which symbol it is drawn with: Zener becomes Mokxi's zener, Schottky its Schottky diode, and a normal one the 1N4148. A BJT whose first property is pnp is a PNP, otherwise an NPN; a MOSFET whose first property is pfet is P-channel. Their B, C, E and G, D, S pins carry the joins.
What does not, and what happens instead
Simulations, equations and diagrams
A .DC, .TR, .AC or .SP block, an Eqn, and every entry under <Diagrams> and <Paintings> are not parts. The report says they were left out and that Mokxi runs the circuit itself: put a probe, meter or scope on a node to watch it.
Probes
An IProbe is an ideal ammeter, so it becomes a plain wire between its two ends; the report suggests a Mokxi ammeter in its place. A VProbe is left out, with the suggestion of a Mokxi probe or voltmeter on that node.
Variables, bulk pins and odd devices
A value that is a Qucs variable or equation (R = Rload) is not a number Mokxi reads, so the part keeps its default and the report names the component and property. The fourth pin of a BJT (substrate) or MOSFET (bulk) is left out: Mokxi's transistors have three. A depletion MOSFET and a varactor have no Mokxi part.
Everything else
Sub (a subcircuit), Lib (a library part, named with its library), Port, Idc and any other model become a labeled note where they stood, carrying the model and the component name.
From Qucs to Mokxi
Step 1
In Qucs, Qucs-S or QucsStudio, save the schematic; the .sch is the file to bring.
Step 2
Drag the .sch to the box above, or straight into the editor, or paste the text in; from the first line Mokxi tells you it looks like a Qucs schematic.
Step 3
The schematic opens as a circuit with every known component placed, and the summary chip reports the simulation blocks left out, the probes replaced, and any variable that fell back to a default.
Step 4
Press Run, then place a probe or scope where your Qucs diagram was looking, and use Tidy wires (T) for the wiring.
Questions about importing from Qucs
Is there a Qucs online version?
Qucs, Qucs-S and QucsStudio are desktop programs. Mokxi lives in a browser tab and understands their .sch files, so a schematic drawn in any of them can be opened and run here without installing anything. The comparison page linked below sets Mokxi and Qucs-S side by side.
Does this read Qucs-S and QucsStudio files?
Yes. Qucs-S writes the same <Qucs Schematic> format and is read exactly like Qucs. A QucsStudio file announces itself on its first line and is read the same way, with one extra note: a component that exists only in QucsStudio becomes a note.
Where did my simulation results go?
Qucs runs a simulation block and draws the result in a diagram. Mokxi runs the circuit continuously instead, so the .TR, .DC and .AC blocks and the diagrams are left out and the report says so. Put a probe, a meter or a scope on the node your diagram showed.
Why did a component come in as a note?
Either Mokxi has no part for it (a subcircuit, a library part, a port, a current source) or its pins are not in the table copied from the Qucs sources. The note sits where the component stood and names its model, so you can replace it with a Mokxi part and rewire.
Why did a resistor get a default value?
Its value in Qucs was a variable or an equation, such as Rload, which is not a number Mokxi reads. The report names the component and the property, so set it in the part's settings.
I have a SPICE netlist from Qucs-S, not a .sch. Can I open that?
Yes, by another route. A netlist is a SPICE deck; in the editor, open the Save menu and pick Open JSON or SPICE. Only the schematic file comes through this page.
Where to next
What this page says about Qucs was checked in November 2026 against Qucs project, Qucs-S project.
