Space

Space projects for Arduino

These are the projects named for space, with rockets, rovers, satellites, the moon and the planets. Mokxi has 8 of them, all advanced. Here are all of them, from “Mars rover” to “Orbit simulator”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

How to pick your first one

  • Start with “Space Invaders on an OLED”, an advanced project that needs an arcade button, a piezo speaker and an OLED display.
  • Every project here is an advanced project, so any one of them makes a fair first build.
  • The parts used most here are the push button (5 projects), the servo motor (4) and the SSD1306 OLED display (4). With those on hand, most of this list is open to you.
  • Space builds are mostly sensors and math, so run them in the simulator and watch the serial monitor while you change one value at a time.
Projects

8 projects ready to run

  • Mars rover, drawn in the Mokxi editor

    Mars rover

    A rover that drives three waypoints by dead reckoning, steers around hazards it sees with a sonar mast, samples soil and light.

    Board
    Arduino Uno R3
    Parts
    L298N motor driver, 2WD robot car chassis, push button, SSD1306 OLED display, VL53L0X time-of-flight sensor, +3 more
    Level
    Advanced
    Open in the simulator
  • Spaceship control panel, drawn in the Mokxi editor

    Spaceship control panel

    Arm three systems, pass the go/no-go poll, lift the safety and launch.

    Board
    Arduino Mega 2560 R3
    Parts
    Slide switch, LED arcade button, TM1637 four-digit display, piezo speaker, WS2812 NeoPixel LEDs, +7 more
    Level
    Advanced
    Open in the simulator
  • Rocket flight computer, drawn in the Mokxi editor

    Rocket flight computer

    A model rocket flight computer: launch, burnout and a filtered apogee that fires the parachute servo, with a self-test.

    Board
    Arduino Uno R3
    Parts
    MicroSD card module, servo motor, pressure and temperature, MPU6050 accelerometer and gyro, push button, +3 more
    Level
    Advanced
    Open in the simulator
  • Space Invaders on an OLED, drawn in the Mokxi editor

    Space Invaders on an OLED

    Space Invaders on an OLED with an Arduino: invaders that march faster as you shoot them, three buttons to move and fire, bombs.

    Board
    Arduino Uno R3
    Parts
    Arcade button, piezo speaker, SSD1306 OLED display
    Level
    Advanced
    Open in the simulator
  • Satellite tracker, drawn in the Mokxi editor

    Satellite tracker

    A stepper and a servo point a small dish at a satellite on a demo pass, from a simplified circular-orbit model.

    Board
    Arduino Uno R3
    Parts
    28BYJ-48 stepper and ULN2003, servo motor, push button, resistor, LED, +2 more
    Level
    Advanced
    Open in the simulator
  • Moon phase clock, drawn in the Mokxi editor

    Moon phase clock

    The Moon's phase for today, computed from a DS3231 clock and drawn on a round GC9A01 display, with the days left to the next full moon.

    Board
    Arduino Uno R3
    Parts
    GC9A01 round display, DS3231 real-time clock, push button
    Level
    Advanced
    Open in the simulator
  • Lunar Lander, drawn in the Mokxi editor

    Lunar Lander

    Land a rocket on the Moon with one button on a 128x64 OLED: thrust against gravity, mind the fuel gauge and the speed.

    Board
    Arduino Uno R3
    Parts
    SSD1306 OLED display, arcade button, buzzer
    Level
    Advanced
    Open in the simulator
  • Orbit simulator, drawn in the Mokxi editor

    Orbit simulator

    A planet and its moon pull on each other on a 128x64 OLED, and a knob turns gravity up and down: round orbits, ovals, crashes and escapes.

    Board
    Arduino Uno R3
    Parts
    SSD1306 OLED display, potentiometer, push button
    Level
    Advanced
    Open in the simulator