Project ideas by part

Projects with a solenoid

7 Mokxi projects use a solenoid (1 beginner and 6 intermediate). They run on Arduino Uno boards. Here are all of them, from “ULN2003A solenoid from an Arduino” to “Washing machine”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

How to pick your first one

  • Start with “ULN2003A solenoid from an Arduino”, a beginner project that needs an ULN2003A Darlington array, a solenoid and an oscilloscope.
  • All of them run on an Arduino Uno, so that is the one board you need.
  • The parts used most here are the DC motor (4 projects), the I2C LCD (4) and the push button (4). With those on hand, most of this list is open to you.
  • Before you build one on a real bench, open the solenoid part page for its pins and what each one does.
Projects

7 projects ready to run

  • ULN2003A solenoid from an Arduino, drawn in the Mokxi editor

    ULN2003A solenoid from an Arduino

    Blink on pin 13 switches a 12 V, 40 ohm solenoid through a ULN2003A: 0.27 A that a pin could never give.

    Board
    Arduino Uno R3
    Parts
    ULN2003A Darlington array, solenoid, oscilloscope
    Level
    Beginner
    Open in the simulator
  • Solenoid tap, drawn in the Mokxi editor

    Solenoid tap

    An Uno taps a 12 V solenoid once a second through a MOSFET, with a diode across the coil to catch the kick when it lets go.

    Board
    Arduino Uno R3
    Parts
    MOSFET, diode, solenoid, bench power supply
    Level
    Intermediate
    Open in the simulator
  • Car wash, drawn in the Mokxi editor

    Car wash

    Drive a car up to the sensor and press START: it rinses, soaps, brushes, rinses and dries on a timeline.

    Board
    Arduino Uno R3
    Parts
    Traffic light module, two-channel relay board, solenoid, mini water pump, MX1508 dual motor driver, +7 more
    Level
    Intermediate
    Open in the simulator
  • Batch mixer, drawn in the Mokxi editor

    Batch mixer

    Pick a recipe on a keypad and a relay board runs it: fill A to a level, fill B for a time, mix, then drain.

    Board
    Arduino Uno R3
    Parts
    4x3 telephone keypad, four-channel relay board, solenoid, DC motor, buzzer, +2 more
    Level
    Intermediate
    Open in the simulator
  • Leak detector with shutoff valve, drawn in the Mokxi editor

    Leak detector with shutoff valve

    A teaching model: a YF-S201 flow sensor and an EEPROM totalizer watch for water that never stops or a trickle nobody is using.

    Board
    Arduino Uno R3
    Parts
    Water flow sensor, solenoid, bench power supply, MOSFET, diode, +5 more
    Level
    Intermediate
    Open in the simulator
  • Packaging line, drawn in the Mokxi editor

    Packaging line

    An E18-D80NK counts items into a box; when the count reaches the box size set with a button, the feed relay stops.

    Board
    Arduino Uno R3
    Parts
    Servo motor, buzzer, push button, two-channel relay board, DC motor, +3 more
    Level
    Intermediate
    Open in the simulator
  • Washing machine, drawn in the Mokxi editor

    Washing machine

    Pick a cycle on the knob and press START: it fills, washes with a reversing drum, drains and spins, and it only spins with the lid shut and locked.

    Board
    Arduino Uno R3
    Parts
    Servo motor, two-channel relay board, solenoid, mini water pump, L9110S motor driver, +6 more
    Level
    Intermediate
    Open in the simulator