Project ideas by part

Projects with a NEMA 17 stepper motor

12 Mokxi projects use a NEMA 17 stepper motor (10 intermediate and 2 advanced). They run on Arduino Uno and Arduino Nano boards, and 1 needs no board at all. Here are all of them, from “TB6600 stepper driver” to “Camera slider with eased moves”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

How to pick your first one

  • Start with “Steppers on A4988 and DRV8825”, an intermediate project that needs an A4988 stepper driver and a NEMA 17 stepper motor.
  • Arduino Uno runs 10 of them, Arduino Nano 1 and 1 needs no board at all. Start on the board you have, or on an Arduino Uno if you are buying one.
  • The parts used most here are the A4988 stepper driver (7 projects), the limit switch (5) and the push button (4). With those on hand, most of this list is open to you.
  • Before you build one on a real bench, open the NEMA 17 stepper motor part page for its pins and what each one does.
Projects

12 projects ready to run

  • TB6600 stepper driver, drawn in the Mokxi editor

    TB6600 stepper driver

    A NEMA 23 on a TB6600 wired common cathode to pins 2, 3 and 4: a turn forward, half a turn back, then offline with ENA, at 1/8 step.

    Board
    Arduino Uno R3
    Parts
    TB6600 stepper driver, NEMA 17 stepper motor
    Level
    Intermediate
    Open in the simulator
  • Steppers on A4988 and DRV8825, drawn in the Mokxi editor

    Steppers on A4988 and DRV8825

    STEP and DIR into an A4988 and a DRV8825, each turning a NEMA 17. The same pulses to both, and the DRV8825 turns half as far.

    Board
    Arduino Uno R3
    Parts
    A4988 stepper driver, NEMA 17 stepper motor
    Level
    Intermediate
    Open in the simulator
  • Two steppers on a CNC shield, drawn in the Mokxi editor

    Two steppers on a CNC shield

    A CNC shield v3 with A4988 drivers on an Uno: the X and Y NEMA 17s turn a quarter turn each way, stepped on pins 2 and 3, turned on 5 and 6.

    Board
    Arduino Uno R3
    Parts
    CNC shield v3 with A4988s, NEMA 17 stepper motor, DC voltage source
    Level
    Intermediate
    Open in the simulator
  • Stepper homing, drawn in the Mokxi editor

    Stepper homing

    An A4988 and a NEMA 17 home against a microswitch endstop the way a 3D printer does, fast and then a slow second touch.

    Board
    Arduino Uno R3
    Parts
    A4988 stepper driver, NEMA 17 stepper motor, limit switch
    Level
    Intermediate
    Open in the simulator
  • TMC2209 stepper driver, drawn in the Mokxi editor

    TMC2209 stepper driver

    A NEMA 17 on a TMC2209 with STEP, DIR and EN on pins 2, 3 and 4: one turn each way at the default 1/8 step, 1600 pulses a turn.

    Board
    Arduino Uno R3
    Parts
    TMC2209 stepper driver, NEMA 17 stepper motor
    Level
    Intermediate
    Open in the simulator
  • Five StepStick drivers left alone, drawn in the Mokxi editor

    Five StepStick drivers left alone

    TMC2208, TMC2209, TMC2100, DRV8834 and DRV8880 on one 200 Hz clock each: left alone, each steps at its own default resolution.

    Board
    No board
    Parts
    TMC2208 stepper driver, NEMA 17 stepper motor, clock, TMC2209 stepper driver, TMC2100 stepper driver, +2 more
    Level
    Intermediate
    Open in the simulator
  • Filament runout sensor, drawn in the Mokxi editor

    Filament runout sensor

    An optical slot sensor on the filament path and an A4988 extruder: a debounced runout, 10 mm more printed from the filament still in the path.

    Board
    Arduino Uno R3
    Parts
    A4988 stepper driver, NEMA 17 stepper motor, slot photo interrupter, push button, LED, +2 more
    Level
    Intermediate
    Open in the simulator
  • Stepper speed control with a TMC2209 and a knob, drawn in the Mokxi editor

    Stepper speed control with a TMC2209 and a knob

    A knob on A0 sets the speed and direction of a NEMA 17 on a quiet TMC2209 with AccelStepper: stop in the middle, up to 120 rpm either way, eased.

    Board
    Arduino Uno R3
    Parts
    Potentiometer, TMC2209 stepper driver, NEMA 17 stepper motor
    Level
    Intermediate
    Open in the simulator
  • Automatic curtain opener with a stepper motor, drawn in the Mokxi editor

    Automatic curtain opener with a stepper motor

    A NEMA 17 on an A4988 homes to an end switch, opens the curtain at dawn and closes it at dusk, with a button to open, close or stop and a speed knob.

    Board
    Arduino Uno R3
    Parts
    A4988 stepper driver, NEMA 17 stepper motor, DC jack and adapter, capacitor, limit switch, +4 more
    Level
    Intermediate
    Open in the simulator
  • XY pen plotter, drawn in the Mokxi editor

    XY pen plotter

    Two steppers and a pen-lift servo home to their end switches, then draw a square and a star from a list of points, counting every step on an LCD.

    Board
    Arduino Uno R3
    Parts
    A4988 stepper driver, NEMA 17 stepper motor, servo motor, push button, limit switch, +1 more
    Level
    Intermediate
    Open in the simulator
  • Mini G-code plotter, drawn in the Mokxi editor

    Mini G-code plotter

    A two-axis plotter that reads G28, G0, G1, G90, G91 and M114 from the Serial Monitor.

    Board
    Arduino Uno R3
    Parts
    A4988 stepper driver, NEMA 17 stepper motor, limit switch
    Level
    Advanced
    Open in the simulator
  • Camera slider with eased moves, drawn in the Mokxi editor

    Camera slider with eased moves

    A NEMA 17 on an A4988 homes to an end switch, then makes a video move that speeds up and slows down evenly, or a timelapse that moves.

    Board
    Arduino Nano
    Parts
    LED, resistor, potentiometer, push button, slide switch, +3 more
    Level
    Advanced
    Open in the simulator