Projects with an A4988 stepper driver
9 Mokxi projects use an A4988 stepper driver (6 intermediate and 3 advanced). They run on Arduino Uno and Arduino Nano boards. Here are all of them, from “Steppers on A4988 and DRV8825” to “Arcade claw machine”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.
How to pick your first one
- Start with “Steppers on A4988 and DRV8825”, an intermediate project that needs an A4988 stepper driver and a NEMA 17 stepper motor.
- Arduino Uno runs 8 of them and Arduino Nano 1. Start on the board you have, or on an Arduino Uno if you are buying one.
- The parts used most here are the NEMA 17 stepper motor (7 projects), the limit switch (6) and the push button (4). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the A4988 stepper driver part page for its pins and what each one does.
9 projects ready to run

Steppers on A4988 and DRV8825
STEP and DIR into an A4988 and a DRV8825, each turning a NEMA 17. The same pulses to both, and the DRV8825 turns half as far.
- Board
- Arduino Uno R3
- Parts
- A4988 stepper driver, NEMA 17 stepper motor
- Level
- Intermediate

Two hands
A biaxial stepper as a clock: two A4988s step its outer and inner hands, a minute every second, counting the fractional steps they owe.
- Board
- Arduino Uno R3
- Parts
- A4988 stepper driver, biaxial stepper
- Level
- Intermediate

Stepper homing
An A4988 and a NEMA 17 home against a microswitch endstop the way a 3D printer does, fast and then a slow second touch.
- Board
- Arduino Uno R3
- Parts
- A4988 stepper driver, NEMA 17 stepper motor, limit switch
- Level
- Intermediate

Filament runout sensor
An optical slot sensor on the filament path and an A4988 extruder: a debounced runout, 10 mm more printed from the filament still in the path.
- Board
- Arduino Uno R3
- Parts
- A4988 stepper driver, NEMA 17 stepper motor, slot photo interrupter, push button, LED, +2 more
- Level
- Intermediate

Automatic curtain opener with a stepper motor
A NEMA 17 on an A4988 homes to an end switch, opens the curtain at dawn and closes it at dusk, with a button to open, close or stop and a speed knob.
- Board
- Arduino Uno R3
- Parts
- A4988 stepper driver, NEMA 17 stepper motor, DC jack and adapter, capacitor, limit switch, +4 more
- Level
- Intermediate

XY pen plotter
Two steppers and a pen-lift servo home to their end switches, then draw a square and a star from a list of points, counting every step on an LCD.
- Board
- Arduino Uno R3
- Parts
- A4988 stepper driver, NEMA 17 stepper motor, servo motor, push button, limit switch, +1 more
- Level
- Intermediate

Mini G-code plotter
A two-axis plotter that reads G28, G0, G1, G90, G91 and M114 from the Serial Monitor.
- Board
- Arduino Uno R3
- Parts
- A4988 stepper driver, NEMA 17 stepper motor, limit switch
- Level
- Advanced

Camera slider with eased moves
A NEMA 17 on an A4988 homes to an end switch, then makes a video move that speeds up and slows down evenly, or a timelapse that moves.
- Board
- Arduino Nano
- Parts
- LED, resistor, potentiometer, push button, slide switch, +3 more
- Level
- Advanced

Arcade claw machine
A complete claw machine you can watch: a stepper gantry with home switches, winch, servo claw and prizes in the cabinet, a coin switch.
- Board
- Arduino Uno R3
- Parts
- A4988 stepper driver, joystick, claw machine cabinet, arcade button, DRV8833 motor driver, +5 more
- Level
- Advanced