Project ideas by part

Projects with a microSD card module

4 Mokxi projects use a microSD card module (1 intermediate and 3 advanced). They run on Arduino Uno and Arduino Mega boards. Here are all of them, from “Temperature data logger with an SD card” to “RFID attendance system”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

How to pick your first one

  • Start with “Temperature data logger with an SD card”, an intermediate project that needs a microSD card module, a resistor, an LED and 2 more parts.
  • Arduino Uno runs 3 of them and Arduino Mega 1. Start on the board you have, or on an Arduino Uno if you are buying one.
  • The parts used most here are the DS3231 real-time clock (2 projects), the LED (2) and the buzzer (1). With those on hand, most of this list is open to you.
  • Before you build one on a real bench, open the microSD card module part page for its pins and what each one does.
Projects

4 projects ready to run

  • Temperature data logger with an SD card, drawn in the Mokxi editor

    Temperature data logger with an SD card

    A DS18B20, a DS3231 clock and a microSD card: every 5 seconds a dated temperature line goes into TEMPLOG.CSV, ready to open in a spreadsheet.

    Board
    Arduino Uno R3
    Parts
    MicroSD card module, resistor, LED, DS18B20 temperature sensor, DS3231 real-time clock
    Level
    Intermediate
    Open in the simulator
  • GPS logger, drawn in the Mokxi editor

    GPS logger

    A NEO-6M on the Mega’s second serial port and a microSD card: every position goes into TRACK.CSV, which you can watch grow and download.

    Board
    Arduino Mega 2560 R3
    Parts
    GPS module, microSD card module
    Level
    Advanced
    Open in the simulator
  • Rocket flight computer, drawn in the Mokxi editor

    Rocket flight computer

    A model rocket flight computer: launch, burnout and a filtered apogee that fires the parachute servo, with a self-test.

    Board
    Arduino Uno R3
    Parts
    MicroSD card module, servo motor, pressure and temperature, MPU6050 accelerometer and gyro, push button, +3 more
    Level
    Advanced
    Open in the simulator
  • RFID attendance system, drawn in the Mokxi editor

    RFID attendance system

    RFID attendance system on an Arduino: tap a card on an RC522, the LCD shows IN, LATE or OUT with the DS3231 time, and a CSV on the SD card logs it.

    Board
    Arduino Uno R3
    Parts
    MFRC522 RFID reader, microSD card module, DS3231 real-time clock, I2C LCD, piezo speaker
    Level
    Advanced
    Open in the simulator