Project ideas by part

Projects with a DS3231 real-time clock

10 Mokxi projects use a DS3231 real-time clock (1 beginner, 6 intermediate and 3 advanced). They run on Arduino Uno and ESP32 boards. Here are all of them, from “DS3231 real-time clock on I2C” to “RFID attendance system”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

How to pick your first one

  • Start with “DS3231 real-time clock on I2C”, a beginner project that needs a DS3231 real-time clock.
  • Arduino Uno runs 9 of them and ESP32 1. Start on the board you have, or on an Arduino Uno if you are buying one.
  • The parts used most here are the I2C LCD (3 projects), the GC9A01 round display (2) and the LED (2). With those on hand, most of this list is open to you.
  • Before you build one on a real bench, read the DS3231 real-time clock wiring guide for your board below. It gives every pin and the voltage notes.
Projects

10 projects ready to run

  • DS3231 real-time clock on I2C, drawn in the Mokxi editor

    DS3231 real-time clock on I2C

    A DS3231 clock module on A4 and A5 keeps the date and time; RTClib reads it once a second and prints the date, the time and the day of the week.

    Board
    Arduino Uno R3
    Parts
    DS3231 real-time clock
    Level
    Beginner
    Open in the simulator
  • Round watch face, drawn in the Mokxi editor

    Round watch face

    An analog watch face on a GC9A01 round display: hour, minute and second hands from a DS3231 clock, redrawn each second.

    Board
    Arduino Uno R3
    Parts
    GC9A01 round display, DS3231 real-time clock
    Level
    Intermediate
    Open in the simulator
  • Desk clock, drawn in the Mokxi editor

    Desk clock

    A DS3231 over I2C and a TM1637 on two wires that are not I2C.

    Board
    Arduino Uno R3
    Parts
    DS3231 real-time clock, TM1637 four-digit display, logic analyzer
    Level
    Intermediate
    Open in the simulator
  • Christmas countdown, drawn in the Mokxi editor

    Christmas countdown

    A DS3231 keeps the date and an eight-digit MAX7219 display in the window counts the days, hours, minutes and seconds to Christmas, then flashes 25.12.

    Board
    Arduino Uno R3
    Parts
    Eight-digit display, DS3231 real-time clock
    Level
    Intermediate
    Open in the simulator
  • Automatic pet feeder, drawn in the Mokxi editor

    Automatic pet feeder

    A DS3231 clock opens an MG996R food gate at three meal times a day, with a chirp first, the next meal on an I2C LCD and a FEED NOW button.

    Board
    Arduino Uno R3
    Parts
    DS3231 real-time clock, servo, push button, buzzer, I2C LCD
    Level
    Intermediate
    Open in the simulator
  • Temperature data logger with an SD card, drawn in the Mokxi editor

    Temperature data logger with an SD card

    A DS18B20, a DS3231 clock and a microSD card: every 5 seconds a dated temperature line goes into TEMPLOG.CSV, ready to open in a spreadsheet.

    Board
    Arduino Uno R3
    Parts
    MicroSD card module, resistor, LED, DS18B20 temperature sensor, DS3231 real-time clock
    Level
    Intermediate
    Open in the simulator
  • New Year's countdown, drawn in the Mokxi editor

    New Year's countdown

    A DS3231 and a four-digit display count down to midnight on New Year’s Eve.

    Board
    Arduino Uno R3
    Parts
    DS3231 real-time clock, TM1637 four-digit display, resistor, WS2812 NeoPixel LEDs
    Level
    Intermediate
    Open in the simulator
  • Smart home hub, drawn in the Mokxi editor

    Smart home hub

    An ESP32-C3 web dashboard that switches a lamp and a fan through relays, dims a porch light, reads temperature, humidity and motion.

    Board
    ESP32-C3-DevKitM-1
    Parts
    Two-channel relay board, filament lamp, DC motor, LED, resistor, +4 more
    Level
    Advanced
    Open in the simulator
  • Moon phase clock, drawn in the Mokxi editor

    Moon phase clock

    The Moon's phase for today, computed from a DS3231 clock and drawn on a round GC9A01 display, with the days left to the next full moon.

    Board
    Arduino Uno R3
    Parts
    GC9A01 round display, DS3231 real-time clock, push button
    Level
    Advanced
    Open in the simulator
  • RFID attendance system, drawn in the Mokxi editor

    RFID attendance system

    RFID attendance system on an Arduino: tap a card on an RC522, the LCD shows IN, LATE or OUT with the DS3231 time, and a CSV on the SD card logs it.

    Board
    Arduino Uno R3
    Parts
    MFRC522 RFID reader, microSD card module, DS3231 real-time clock, I2C LCD, piezo speaker
    Level
    Advanced
    Open in the simulator