Project ideas by part

Projects with an ILI9341 TFT display

16 Mokxi projects use an ILI9341 TFT display (5 intermediate and 11 advanced). They run on Arduino Uno and ESP32 boards. Here are all of them, from “OBD-II style gauge cluster” to “Factory 10: Build your own”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

How to pick your first one

  • Start with “OBD-II style gauge cluster”, an intermediate project that needs an ILI9341 TFT display and a potentiometer.
  • Arduino Uno runs 14 of them and ESP32 2. Start on the board you have, or on an Arduino Uno if you are buying one.
  • The parts used most here are the piezo speaker (15 projects), the LED (10) and the push button (10). With those on hand, most of this list is open to you.
  • Before you build one on a real bench, open the ILI9341 TFT display part page for its pins and what each one does.
Projects

16 projects ready to run

  • OBD-II style gauge cluster, drawn in the Mokxi editor

    OBD-II style gauge cluster

    Three knobs stand in for a car's engine sensors, and a color TFT shows a tachometer, speed in mph and coolant temperature that turns red above 110 C.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, potentiometer
    Level
    Intermediate
    Open in the simulator
  • Factory 2: Belts, drawn in the Mokxi editor

    Factory 2: Belts

    A conveyor belt on a TFT, driven by a knob: turn right to run it forward, left to run it backward, and watch the lumps ride at the speed you set.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, piezo speaker, resistor, LED, push button, +1 more
    Level
    Intermediate
    Open in the simulator
  • Factory 3: Robot arm, drawn in the Mokxi editor

    Factory 3: Robot arm

    A servo robot arm picks lumps off one belt and drops them on another. Tune its speed and grab time on two knobs and watch lumps get missed or slip.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, servo motor, resistor, LED, piezo speaker, +1 more
    Level
    Intermediate
    Open in the simulator
  • Factory 1: Mining drill, drawn in the Mokxi editor

    Factory 1: Mining drill

    A drill digs ore and fills a hopper on a TFT. Press the button to unload it into the shipped counter, or watch the drill stop when the hopper is full.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, piezo speaker, resistor, LED, push button
    Level
    Intermediate
    Open in the simulator
  • Factory 4: Smelter, drawn in the Mokxi editor

    Factory 4: Smelter

    A furnace turns three ore into one plate on a recipe timer.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, push button, resistor, LED, piezo speaker, +1 more
    Level
    Intermediate
    Open in the simulator
  • Pong console, drawn in the Mokxi editor

    Pong console

    An Uno, a 240x320 TFT, a thumb stick and a piezo: a paddle game in the window an Uno can repaint.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, joystick, piezo speaker
    Level
    Advanced
    Open in the simulator
  • D-pad pong, drawn in the Mokxi editor

    D-pad pong

    A TFT, a console pad and a piezo on an Uno: paddle game, arrow keys or clicks, A to serve.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, game console buttons, piezo speaker
    Level
    Advanced
    Open in the simulator
  • Pong, two buttons, drawn in the Mokxi editor

    Pong, two buttons

    A TFT paddle game on an ILI9341 screen, full screen at forty frames a second, played with two buttons.

    Board
    ESP32-C3-DevKitM-1
    Parts
    ILI9341 TFT display, push button, piezo speaker
    Level
    Advanced
    Open in the simulator
  • Snake, drawn in the Mokxi editor

    Snake

    Snake on a 240x320 TFT with a thumb stick: eat the apple, grow, and repaint only the squares that moved.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, joystick, piezo speaker
    Level
    Advanced
    Open in the simulator
  • Handheld game console, drawn in the Mokxi editor

    Handheld game console

    A pocket console you can build: an ESP32-C3, a color TFT, a D-pad, A, B, Start and Select, chiptune on a piezo and a battery gauge.

    Board
    ESP32-C3-DevKitM-1
    Parts
    ILI9341 TFT display, game console buttons, piezo speaker, push button, battery: AA, +1 more
    Level
    Advanced
    Open in the simulator
  • Factory 7: Power grid, drawn in the Mokxi editor

    Factory 7: Power grid

    A generator feeds the machines you build. Overbuild and the grid browns out, then blacks out; a governor mode matches supply to demand.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, push button, resistor, LED, piezo speaker, +2 more
    Level
    Advanced
    Open in the simulator
  • Factory 5: Assembler, drawn in the Mokxi editor

    Factory 5: Assembler

    An assembler builds a widget from two plates and a gear.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, push button, resistor, LED, piezo speaker, +1 more
    Level
    Advanced
    Open in the simulator
  • Factory 8: Logistics robot, drawn in the Mokxi editor

    Factory 8: Logistics robot

    A delivery robot plans a route around the machines with A* search, fetches crates and brings them to the depot.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, joystick, push button, servo motor, resistor, +2 more
    Level
    Advanced
    Open in the simulator
  • Factory 9: Production dashboard, drawn in the Mokxi editor

    Factory 9: Production dashboard

    A three-stage line measured live: items per minute and how busy each machine is over a rolling twenty seconds.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, push button, resistor, LED, piezo speaker, +1 more
    Level
    Advanced
    Open in the simulator
  • Factory 6: Splitter and merger, drawn in the Mokxi editor

    Factory 6: Splitter and merger

    A splitter deals items to two lanes and a merger joins them again.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, push button, servo motor, resistor, LED, +2 more
    Level
    Advanced
    Open in the simulator
  • Factory 10: Build your own, drawn in the Mokxi editor

    Factory 10: Build your own

    Design your own factory with a keypad: type two-digit codes to place belts, drills, presses and chests, then run it and watch ore turn into plates.

    Board
    Arduino Uno R3
    Parts
    ILI9341 TFT display, 4x4 keypad, resistor, LED, piezo speaker
    Level
    Advanced
    Open in the simulator