Project ideas by part

Projects with a four-channel relay board

4 Mokxi projects use a four-channel relay board (2 beginner and 2 intermediate). They run on Arduino Uno boards. Here are all of them, from “Bluetooth home automation with relays” to “Batch mixer”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.

First project

How to pick your first one

  • Start with “Bluetooth home automation with relays”, a beginner project that needs an HC-05 Bluetooth module, a resistor, a four-channel relay board and 2 more parts.
  • All of them run on an Arduino Uno, so that is the one board you need.
  • The parts used most here are the filament lamp (2 projects), the buzzer (1) and the DC motor (1). With those on hand, most of this list is open to you.
  • Before you build one on a real bench, open the four-channel relay board part page for its pins and what each one does.
Projects

4 projects ready to run

  • Bluetooth home automation with relays, drawn in the Mokxi editor

    Bluetooth home automation with relays

    An HC-05 and a four-relay board: send 1 to 4 from the module’s box, as a phone app does, and that lamp toggles; A and a switch them all, ?

    Board
    Arduino Uno R3
    Parts
    HC-05 Bluetooth module, resistor, four-channel relay board, DC jack and adapter, filament lamp
    Level
    Beginner
    Open in the simulator
  • IR remote control relay module, drawn in the Mokxi editor

    IR remote control relay module

    IRremote and a 21-key handset: keys 1 to 4 toggle the four channels of a relay board, each switching a 12 V lamp, and 0 turns them all off.

    Board
    Arduino Uno R3
    Parts
    IR remote, IR receiver and remote, four-channel relay board, DC jack and adapter, filament lamp
    Level
    Beginner
    Open in the simulator
  • Relay board, drawn in the Mokxi editor

    Relay board

    A four-channel relay board chasing four lamps from pins 2 to 5. Active low, so LOW is on, and the pins are written HIGH before they become outputs.

    Board
    Arduino Uno R3
    Parts
    Four-channel relay board, resistor, LED
    Level
    Intermediate
    Open in the simulator
  • Batch mixer, drawn in the Mokxi editor

    Batch mixer

    Pick a recipe on a keypad and a relay board runs it: fill A to a level, fill B for a time, mix, then drain.

    Board
    Arduino Uno R3
    Parts
    4x3 telephone keypad, four-channel relay board, solenoid, DC motor, buzzer, +2 more
    Level
    Intermediate
    Open in the simulator