Projects with an HC-05 Bluetooth module
4 Mokxi projects use an HC-05 Bluetooth module (2 beginner and 2 intermediate). They run on Arduino Uno boards. Here are all of them, from “Bluetooth chat” to “Bluetooth RC car with an HC-05”. Each card says what the project does, the board and parts it needs and its level, and Open in the simulator runs it in your browser in one click, with no account.
How to pick your first one
- Start with “Bluetooth chat”, a beginner project that needs an HC-05 Bluetooth module.
- All of them run on an Arduino Uno, so that is the one board you need.
- The parts used most here are the 2WD robot car chassis (1 project), the L298N motor driver (1) and the filament lamp (1). With those on hand, most of this list is open to you.
- Before you build one on a real bench, open the HC-05 Bluetooth module part page for its pins and what each one does.
4 projects ready to run

Bluetooth chat
The HC-05 tutorial sketch with SoftwareSerial at 9600. Type as the phone in the module’s serial box, and send 1 or 0 for the LED.
- Board
- Arduino Uno R3
- Parts
- HC-05 Bluetooth module
- Level
- Beginner

Bluetooth home automation with relays
An HC-05 and a four-relay board: send 1 to 4 from the module’s box, as a phone app does, and that lamp toggles; A and a switch them all, ?
- Board
- Arduino Uno R3
- Parts
- HC-05 Bluetooth module, resistor, four-channel relay board, DC jack and adapter, filament lamp
- Level
- Beginner

Bluetooth lamp
An HC-05 modeled as what it is to the board: a serial bridge whose far end is the serial monitor. Type on or off and the lamp answers.
- Board
- Arduino Uno R3
- Parts
- HC-05 Bluetooth module, resistor, LED
- Level
- Intermediate

Bluetooth RC car with an HC-05
An HC-05 and a 2WD car on an L298N: type F, B, L, R or S in the module’s box, as a phone app sends them, and the car drives; 0 to 9 set the speed.
- Board
- Arduino Uno R3
- Parts
- L298N motor driver, 2WD robot car chassis, HC-05 Bluetooth module, resistor
- Level
- Intermediate