SHT4x: an example that runs
Yes. You can use the SHT4x library online in Mokxi with nothing to install, and the sketch runs in your browser against the simulated part (Temperature and humidity, SHT40). The example below, "An SHT41 read ten times a second, with the time each read takes", runs on the Arduino Uno R3.
Built in on Mokxi: #include <SHT4x.h> and it builds, with nothing to install. Free, and no account needed.
What SHT4x does
SHT40, SHT41, SHT43 and SHT45: read() at three precisions and the heater pulses, the async requestData() and readData(), getSerialNumber(), heat protection and getError(). That is what SHT4x, by Rob Tillaart, covers. The sketch below uses it on the Arduino Uno: “An SHT41 read ten times a second, with the time each read takes”.
Rob Tillaart's SHT4x library, for the SHT40, SHT41, SHT43 and SHT45 temperature and humidity sensors.
The async calls split that in three, and the heat protection refuses a heater command until 10 s (1 s for the short pulses) have passed since the last, as upstream. The part's heater runs for its time but does not warm the reading.
The calls follow release 0.1.3 of the library, so a sketch written here builds on a real board too. The example is the one Mokxi's own tests build and run, so what is printed here is what runs.
| Library Manager name | SHT4x |
|---|---|
| Author | Rob Tillaart |
| Include | #include <SHT4x.h> |
| Boards | every board Mokxi compiles for but ATtiny85 |
| In the simulator | Simulated: it runs against the part the way it does on the bench. |
| Parts it drives | Temperature and humidity, SHT40 |
Install it
It builds on every board Mokxi compiles for but ATtiny85.
In Mokxi it is built in: #include <SHT4x.h> and the sketch compiles, with no download, no zip and no Library Manager.
On a real board, install "SHT4x" by Rob Tillaart from the Arduino IDE’s Library Manager (Sketch, Include Library, Manage Libraries), or add SHT4x to lib_deps in PlatformIO. Mokxi follows the calls of release 0.1.3, so a sketch written here builds there too.
What to know in the simulator: The heater runs for its time but the part does not warm up.
- ESP32-C3
- Arduino Uno
- Arduino Nano
- Arduino Mega 2560
- Arduino Leonardo
- SparkFun Pro Micro
- Arduino Micro
- ESP32-C6
- WCH CH32V003
- Raspberry Pi Pico
- Raspberry Pi Pico W
- Seeed XIAO SAMD21
- STM32
- STM32 Nucleo-F411RE
- STM32 Blue Pill
- micro:bit V2
- Arduino Uno R4
- ESP32 DevKit
- ESP32-S3-DevKitC-1
- ESP8266 NodeMCU
- Arduino Pro Mini 3.3 V
- Seeed XIAO ESP32-C3
- ESP32-C3 SuperMini
- Seeed XIAO ESP32-C6
- ESP32-DevKitC V4
- LOLIN32 Lite
- Wemos D1 R32
- Cheap Yellow Display
- TTGO T-Display
- Seeed XIAO ESP32-S3
- Arduino Nano ESP32
- Arduino Nano RP2040 Connect
- Seeed XIAO RP2040
- Waveshare RP2040-Zero
- Arduino Uno R4 WiFi
The calls you will use
In the order a sketch meets them.
SHT41 sht
Makes sht, the SHT41 object the calls below are made on.
sht.begin()
Starts it up and returns true if it started, false if it did not. Call it once in setup().
sht.read()
Returns the value as true or false. Arguments: measurement type, crc check.
sht.getTemperature()
Returns the temperature as a decimal number.
sht.getHumidity()
Returns the humidity as a decimal number.
Example: An SHT41 read ten times a second, with the time each read takes
On the Arduino Uno R3. It runs in the browser exactly as printed.
#include "Wire.h"
#include "SHT4x.h"
uint32_t start;
uint32_t stop;
SHT41 sht;
void setup() {
Serial.begin(115200);
Serial.println();
Serial.print("SHT4x_LIB_VERSION: \t");
Serial.println(SHT4x_LIB_VERSION);
Serial.println();
Wire.begin();
Wire.setClock(100000);
sht.begin();
}
void loop() {
start = micros();
sht.read(); // default SHT4x_MEASUREMENT_SLOW and true for CRC check
stop = micros();
Serial.print("\t");
Serial.print(stop - start);
Serial.print("\t");
Serial.print(sht.getTemperature(), 1);
Serial.print("\t");
Serial.println(sht.getHumidity(), 1);
delay(100);
}Wiring
- Arduino Uno R3 A4 to Temperature and humidity, SHT40 SDA
- Arduino Uno R3 A5 to Temperature and humidity, SHT40 SCL
- Arduino Uno R3 5V to Temperature and humidity, SHT40 VIN
- Arduino Uno R3 GND to Temperature and humidity, SHT40 GND
Keep going
Try SHT4x without installing anything
Open the example, change the sketch, and keep your version in a free account.