Raspberry Pi simulator for GPIO, in Python with gpiozero
The Raspberry Pi 4 Model B, the Raspberry Pi 5 and the Raspberry Pi Zero 2 W, from their 40-pin header. Your main.py runs in a Python engine in the page, and gpiozero and RPi.GPIO drive the header as they do on a real Pi, on the simulated clock. There is no Linux here, and this page says plainly what that leaves out.
- 9áreas de periféricos modeladas
- 9projetos prontos para rodar
- Tempo realna sua própria máquina

O que é modelado
Tirado do documento de contrato da própria placa e posto em palavras simples, com o que falta ao lado.
Modelado
- O cabeçalho
- All 40 pins in their real order, named by BCM number, with BOARD numbering mapped to them
- Alimentação
- 3V3 on pins 1 and 17, 5V on pins 2 and 4, and the eight grounds
- GPIO
- GPIO 0 to 27 at 3.3 V logic, as inputs with their 50 k pulls or as outputs, with the SoC’s power-on pulls and the 1.8 k pull-ups on GPIO 2 and 3
- gpiozero 2.0.1
- LED, PWMLED, RGBLED, Button, Buzzer, Servo, AngularServo, DistanceSensor, MotionSensor, LineSensor and more, on the lgpio pin factory
- RPi.GPIO 0.7.1
- BCM and BOARD, setup, output, input, PWM, add_event_detect, wait_for_edge and cleanup, with the library’s own warnings and errors
- Tempo
- time.sleep(1) is one simulated second; edge callbacks run at the time of the edge
- The Pi 5
- RPi.GPIO fails there with the error a real Pi 5 gives, and gpiozero works
- I2C e SPI
- /dev/i2c-1 and /dev/spidev0.0 and 0.1, with smbus, smbus2, spidev and gpiozero’s MCP3008, at the speed of the bus and with the errors a Pi gives
- The Serial Monitor
- print() and tracebacks, input(), and Ctrl-C as KeyboardInterrupt
Não modelado
- Linux. There is no kernel, no desktop, no terminal, no sudo and no file system beyond the project’s files.
- pip and apt. Only the modules that come with the board can be imported.
- Networking: no Wi-Fi, Ethernet or Bluetooth, and no socket or requests.
- A câmera, o display, HDMI e áudio.
- The I2C bus’s speed setting and clock stretching: I2C runs at Raspberry Pi OS’s default 100 kHz.
- Threads. gpiozero’s callbacks, blink() and PWM run without them.
- CPython itself: the engine is MicroPython, so a few details of the language differ (isinstance(True, int) is False). Programs that drive the pins run unchanged.
Abra um e aperte Rodar
Cada um destes abre no editor exatamente como está desenhado aqui.
Every built-in project on the Raspberry Pi
Cada um tem sua própria página com o circuito rodando, o código e uma lista de componentes.
Tutoriais que usam esta placa
Cada um termina num circuito rodando, nesta mesma placa.
Perguntas
É grátis?
Sim. Toda placa e todo componente está no plano Grátis, sem precisar de conta.
Isto é um emulador de Raspberry Pi?
No. There is no Arm core and no Linux. Your Python runs in a Python engine in the page, and its gpiozero and RPi.GPIO drive the header. Everything a circuit can see of a Pi is here; the operating system is not.
Why does RPi.GPIO fail on the Pi 5?
Because it fails on a real Pi 5: the pins are on the RP1 chip, which RPi.GPIO 0.7.1 cannot find, and GPIO.setup raises "Cannot determine SOC peripheral base address". Use gpiozero, which works on all three boards.
Posso fazer pip install de uma biblioteca?
Não. Adicione o arquivo .py da biblioteca como uma aba própria e importe do main.py, o que funciona para bibliotecas escritas em Python puro.
Meu programa vai rodar em um Pi de verdade?
Sim, com gpiozero ou RPi.GPIO, como vêm no Raspberry Pi OS. A temporização em um Pi real é mais frouxa: o PWM por software sofre variação lá e não sofre aqui.
As outras placas
Todas estas rodam hoje, e todas são grátis.
Procurando uma introdução mais curta? Veja the Raspberry Pi simulator page.
Um chip RISC-V a 160 MHz, com o mapa de memória real.
O Arduino clássico, com um ATmega328P rodando a 16 MHz.
O chip do Uno numa placa pequena que cabe na protoboard.
O Arduino grandão, com 54 pinos digitais e quatro portas seriais.
Uma placa no formato do Uno cujo chip cuida da própria serial USB.
Uma segunda placa RISC-V, com 31 pinos e WiFi simulado.
O ESP32 clássico a 240 MHz, com WiFi simulado.
O ESP32-S3 a 240 MHz, com serial USB e um LED RGB.
Experimente com o seu próprio Python
Escreva o main.py com gpiozero ou RPi.GPIO e aperte Rodar. Nada para instalar e sem precisar de conta.