Placa

Raspberry Pi simulator for GPIO, in Python with gpiozero

The Raspberry Pi 4 Model B, the Raspberry Pi 5 and the Raspberry Pi Zero 2 W, from their 40-pin header. Your main.py runs in a Python engine in the page, and gpiozero and RPi.GPIO drive the header as they do on a real Pi, on the simulated clock. There is no Linux here, and this page says plainly what that leaves out.

  • 9áreas de periféricos modeladas
  • 9proyectos listos para ejecutar
  • Tiempo realen tu propia máquina
Raspberry Pi 4 Model B: blinken vivo0.000 s 0.00x
Haz clic para abrirlo en el editor
The board is running its main.py right now. Click it to open the circuit in the editor.
Raspberry Pi 4 Model B as drawn in the Mokxi simulator
El modelo

Qué se modela

Tomado del documento de contrato de la propia placa y dicho en palabras sencillas, con lo que falta al lado.

Modelado

El encabezado
All 40 pins in their real order, named by BCM number, with BOARD numbering mapped to them
Alimentación
3V3 on pins 1 and 17, 5V on pins 2 and 4, and the eight grounds
GPIO
GPIO 0 to 27 at 3.3 V logic, as inputs with their 50 k pulls or as outputs, with the SoC’s power-on pulls and the 1.8 k pull-ups on GPIO 2 and 3
gpiozero 2.0.1
LED, PWMLED, RGBLED, Button, Buzzer, Servo, AngularServo, DistanceSensor, MotionSensor, LineSensor and more, on the lgpio pin factory
RPi.GPIO 0.7.1
BCM and BOARD, setup, output, input, PWM, add_event_detect, wait_for_edge and cleanup, with the library’s own warnings and errors
Tiempo
time.sleep(1) is one simulated second; edge callbacks run at the time of the edge
The Pi 5
RPi.GPIO fails there with the error a real Pi 5 gives, and gpiozero works
I2C y SPI
/dev/i2c-1 and /dev/spidev0.0 and 0.1, with smbus, smbus2, spidev and gpiozero’s MCP3008, at the speed of the bus and with the errors a Pi gives
The Serial Monitor
print() and tracebacks, input(), and Ctrl-C as KeyboardInterrupt

No modelado

  • Linux. There is no kernel, no desktop, no terminal, no sudo and no file system beyond the project’s files.
  • pip and apt. Only the modules that come with the board can be imported.
  • Networking: no Wi-Fi, Ethernet or Bluetooth, and no socket or requests.
  • La cámara, la pantalla, el HDMI y el audio.
  • The I2C bus’s speed setting and clock stretching: I2C runs at Raspberry Pi OS’s default 100 kHz.
  • Threads. gpiozero’s callbacks, blink() and PWM run without them.
  • CPython itself: the engine is MicroPython, so a few details of the language differ (isinstance(True, int) is False). Programs that drive the pins run unchanged.
Empieza aquí

Abre uno y presiona Ejecutar

Cada uno de estos se abre en el editor tal como está dibujado aquí.

Aprender

Tutoriales que usan esta placa

Cada uno termina en un circuito funcionando, en esta misma placa.

Preguntas

¿Es gratis?

Sí. Todas las placas y todos los componentes están en el plan Gratis, sin necesidad de cuenta.

¿Esto es un emulador de Raspberry Pi?

No. There is no Arm core and no Linux. Your Python runs in a Python engine in the page, and its gpiozero and RPi.GPIO drive the header. Everything a circuit can see of a Pi is here; the operating system is not.

Why does RPi.GPIO fail on the Pi 5?

Because it fails on a real Pi 5: the pins are on the RP1 chip, which RPi.GPIO 0.7.1 cannot find, and GPIO.setup raises "Cannot determine SOC peripheral base address". Use gpiozero, which works on all three boards.

¿Puedo instalar una biblioteca con pip?

No. Agrega el archivo .py de la biblioteca como una pestaña propia e impórtalo desde main.py, lo que funciona con bibliotecas escritas en Python puro.

¿Mi programa correrá en una Pi real?

Sí, con gpiozero o RPi.GPIO tal como vienen en Raspberry Pi OS. El tiempo en una Pi real es menos preciso: el PWM por software tiembla allá y aquí no.

Pruébalo con tu propio Python

Escribe main.py con gpiozero o RPi.GPIO y presiona Ejecutar. Nada que instalar y sin necesidad de cuenta.