Mapping words to LEDs
Keep each word as a row, a column and a length, pick words for any time rounded to five minutes, and find the LED behind each letter on a snake-wired panel.
Open it in the simulatorA letter grid on WS2812 LEDs that spells the time: words as numbers, a snake-wired panel, a DS3231, brightness by light and animations.
0 of 6 done
6 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
Keep each word as a row, a column and a length, pick words for any time rounded to five minutes, and find the LED behind each letter on a snake-wired panel.
Open it in the simulatorRead lux from a BH1750 and dim the face at night and brighten it by day, from 8 to 255, without flicker.
Open it in the simulatorPut it all together: real time, brightness by light and animations, set the clock from the serial monitor, then design and build your own face.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
Design a face of letters and turn any time into words.
Design an 11 x 10 face that holds every word a clock needs, put an LED behind each letter, and find any word on it.
0 of 5 steps
Keep each word as a row, a column and a length, pick words for any time rounded to five minutes, and find the LED behind each letter on a snake-wired panel.
0 of 5 steps
A real-time clock and a face that follows the room.
Read the time from a DS3231 every second, relight the face when the minute changes, and show the minutes between fives as dots.
0 of 4 steps
Read lux from a BH1750 and dim the face at night and brighten it by day, from 8 to 255, without flicker.
0 of 4 steps
Animations, setting the time and a clock of your own design.
Mark every new five minutes with a sparkle of random letters and a wipe that sweeps the new words in, and play them on request.
0 of 4 steps
Put it all together: real time, brightness by light and animations, set the clock from the serial monitor, then design and build your own face.
0 of 4 steps
All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Build a word clock is part of the maker track, a ladder of courses from zero to expert.
A haunted guest on four servos: keyframe timelines, easing and the animator’s tricks, lip sync to a DFPlayer, PIR triggers with a rest, and idle life so it never freezes.
Open the next courseFollow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the trackEvery lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 6 lessons of Build a word clock are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 5 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Mapping words to LEDs, Brightness by light and Project: a desk word clock.
With "A letter grid", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.