All paths

Build an animatronic creature

A haunted guest on four servos: keyframe timelines, easing and the animator’s tricks, lip sync to a DFPlayer, PIR triggers with a rest, and idle life so it never freezes.

Arduino Uno R3Free6 lessons6 h3 chapters2,026 XPRobotics · Intermediate+150 XP

0 of 6 done

Start the course freeServo choreographyBuild it as a kitRetails for about $47, free on Mokxi.Lesson plan for teachers
What you will build

3 projects, built step by step

6 lessons in 3 chapters, about 6 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

Easing and the animator’s tricks

Every key carries its own easing. Read a pose at any moment, see smooth against linear to the degree, add anticipation, find follow-through in the numbers, and snap a laugh with steps.

Open it in the simulator
Chapter 2 project

Triggers

A PIR starts the show when a guest walks up: look, talk, laugh, then a rest that ignores the PIR so the scare does not loop. Tune the rest and give an operator a hidden trigger.

Open it in the simulator
Chapter 3 project

Project: a haunted guest

Put it together: run the whole show, write a new clip of your own, put it in the show, and fix the guest that never re-triggers for a visitor who will not leave.

Open it in the simulator
The map

Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

Choreography

Keyframe timelines on four servos, and easing, anticipation and follow-through.

  1. Open236 XP

    Servo choreography

    A creature moves many joints at once, on one clock. Read a keyframe timeline, play it on four servos, watch the tilt follow the pan, and add keys of your own: a wider look and a gasp.

    0 of 6 steps

  2. ProjectLocked472 XP

    Easing and the animator’s tricks

    Every key carries its own easing. Read a pose at any moment, see smooth against linear to the degree, add anticipation, find follow-through in the numbers, and snap a laugh with steps.

    0 of 6 steps

4 questions, graded as you go.
Chapter 2

Sound and triggers

Lip sync locked to the DFPlayer’s BUSY pin, and a PIR show with a rest.

  1. Locked236 XP

    Sound sync

    A talking creature lives or dies on lip sync. Start the clock when the DFPlayer’s BUSY pin says the track really started, read what the player is playing, and add a sound to a silent clip.

    0 of 6 steps

  2. ProjectLocked472 XP

    Triggers

    A PIR starts the show when a guest walks up: look, talk, laugh, then a rest that ignores the PIR so the scare does not loop. Tune the rest and give an operator a hidden trigger.

    0 of 6 steps

4 questions, graded as you go.
Chapter 3

Alive

Idle life, then the whole haunted guest made your own.

  1. Locked236 XP

    Idle life

    A creature that freezes between shows is a prop. Give it random blinks and breathing, tune them, and switch them off to see the difference.

    0 of 6 steps

  2. ProjectLocked374 XP

    Project: a haunted guest

    Put it together: run the whole show, write a new clip of your own, put it in the show, and fix the guest that never re-triggers for a visitor who will not leave.

    0 of 5 steps

3 questions, graded as you go.
Syllabus

Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

Choreography

  1. Servo choreographyA creature moves many joints at once, on one clock. Read a keyframe timeline, play it on four servos, watch the tilt follow the pan, and add keys of your own: a wider look and a gasp.
  2. Easing and the animator’s tricksEvery key carries its own easing. Read a pose at any moment, see smooth against linear to the degree, add anticipation, find follow-through in the numbers, and snap a laugh with steps.
Chapter 2

Sound and triggers

  1. Sound syncA talking creature lives or dies on lip sync. Start the clock when the DFPlayer’s BUSY pin says the track really started, read what the player is playing, and add a sound to a silent clip.
  2. TriggersA PIR starts the show when a guest walks up: look, talk, laugh, then a rest that ignores the PIR so the scare does not loop. Tune the rest and give an operator a hidden trigger.
Chapter 3

Alive

  1. Idle lifeA creature that freezes between shows is a prop. Give it random blinks and breathing, tune them, and switch them off to see the difference.
  2. Project: a haunted guestPut it together: run the whole show, write a new clip of your own, put it in the show, and fix the guest that never re-triggers for a visitor who will not leave.
Keep going

The next course on your track

Build an animatronic creature is part of the maker track, a ladder of courses from zero to expert.

Next course

Build an aquarium controller

Build the controller a reef tank runs on: temperature, a guarded heater, sunrise to moonlight, auto top-off and a feeder.

Open the next course
Track

Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.

See every course on the track
Kits

Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

The kit for this course

Animatronic Creature Kit

An Uno, a servo driver (PCA9685 16-channel), a hobby servo and a motion sensor: a creature that looks, talks and laughs at guests.

Open the kit
Have a kit already?

Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.

See every kit
Questions

About Build an animatronic creature

Is Build an animatronic creature free?

Yes. All 6 lessons of Build an animatronic creature are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build an animatronic creature take?

About 6 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Easing and the animator’s tricks, Triggers and Project: a haunted guest.

Where do I start?

With "Servo choreography", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.