Interpolation
Upscale 8x8 to 29x29 with bilinear interpolation: three blends of four pixels, and what it can and cannot show you.
Open it in the simulatorBuild a thermal camera on an Uno: sixty-four heat pixels, color maps, bilinear upscaling, a hot spot finder and snapshots to microSD.
0 of 6 done
6 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
Upscale 8x8 to 29x29 with bilinear interpolation: three blends of four pixels, and what it can and cannot show you.
Open it in the simulatorSave frames to a microSD card as CSV with names that never collide, list them, and handle a missing card without a crash.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
Sixty-four temperatures, turned into a picture and made smooth.
Read an AMG8833 Grid-EYE: sixty-four temperatures ten times a second, laid out row by row, with the hottest and coldest found in one pass.
0 of 5 steps
Turn temperatures into colors: a palette of our own, a gray one, and the choice every thermal camera makes between an automatic and a fixed range.
0 of 5 steps
Upscale 8x8 to 29x29 with bilinear interpolation: three blends of four pixels, and what it can and cannot show you.
0 of 5 steps
Find the hot spot to better than a pixel, and save what you see.
Find the hot spot to better than a pixel with a weighted centroid, see how the frame edge pulls it, and raise an alarm over 50 C.
0 of 5 steps
Save frames to a microSD card as CSV with names that never collide, list them, and handle a missing card without a crash.
0 of 5 steps
Put it all together into a tool that finds where a house leaks.
Turn the camera into a draft finder: the room from the median, cold leaks and warm spots marked on a smooth picture, and snapshots for the record.
0 of 6 steps
All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Build a thermal camera is part of the maker track, a ladder of courses from zero to expert.
A wall clock for the sea: why tides come every 12 h 25 min, a servo hand from high to low, a DS3231 that keeps the time, and one high tide from your port’s table, with an honest look at why it is never for navigation.
Open the next courseFollow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the trackEvery lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 6 lessons of Build a thermal camera are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 5 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Interpolation and Snapshots.
With "64 heat pixels", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.