Edge sensors
A robot that drives out of the ring loses on its own. Two TCRT5000s on the front corners watch for the border, and the check for them beats everything else the robot wants to do.
Open it in the simulatorA mini-sumo robot from the rules up: a legal start, edge sensors that always win, an ultrasonic eye, a state machine with real strategies, and the physics of grip and torque, ending in a tournament.
0 of 6 done
6 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
A robot that drives out of the ring loses on its own. Two TCRT5000s on the front corners watch for the border, and the check for them beats everything else the robot wants to do.
Open it in the simulatorSpin, wait, or sweep: three ways to search, each with a weakness. Try them, add an opening move, and make one the robot’s default.
Open it in the simulatorGet the robot ready for a real tournament: a charge distance for the 77 cm ring, a round timer, and a full rule-legal match, start to finish.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
The real mini-sumo rules, a state machine that obeys them, and edge sensors that keep the robot in.
Two robots, one ring, push the other one out. The real mini-sumo rules in numbers, and the first rule a robot has to obey in code: hands off for five seconds.
0 of 4 steps
A robot that drives out of the ring loses on its own. Two TCRT5000s on the front corners watch for the border, and the check for them beats everything else the robot wants to do.
0 of 4 steps
An ultrasonic eye with a charge distance and a filter, then three ways to search and an opening move.
An HC-SR04 finds the other robot by the echo of a 40 kHz chirp. Time the pings, choose a charge distance that fits the ring, and stop a single missed echo from wrecking a charge.
0 of 5 steps
Spin, wait, or sweep: three ways to search, each with a weakness. Try them, add an opening move, and make one the robot’s default.
0 of 4 steps
Traction against torque in newtons, a tired pack, and a robot ready for a real tournament.
Sumo is won by force, and force comes from grip and torque. Measure the charge, work out which one runs out first, and see what bigger wheels and a tired pack do.
0 of 4 steps
Get the robot ready for a real tournament: a charge distance for the 77 cm ring, a round timer, and a full rule-legal match, start to finish.
0 of 4 steps
All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Build a sumo robot is part of the maker track, a ladder of courses from zero to expert.
Build a thermal camera on an Uno: sixty-four heat pixels, color maps, bilinear upscaling, a hot spot finder and snapshots to microSD.
Open the next courseFollow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the trackEvery lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 6 lessons of Build a sumo robot are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 5 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Edge sensors, Strategies and Project: a tournament.
With "The rules of mini-sumo", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.