Text and bitmaps
Pictures for a print head: one bit per dot, eight dots to a byte, a 16 x 16 icon in 32 bytes, sent as a raster.
Open it in the simulatorDrive a thermal receipt printer from an Uno: ESC/POS bytes, 1-bit bitmaps, a fortune button, a to-do list, ASCII art and a daily brief.
0 of 6 done
6 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
Pictures for a print head: one bit per dot, eight dots to a byte, a 16 x 16 icon in 32 bytes, sent as a raster.
Open it in the simulatorTurn brightness into characters: a ten-step ramp from space to @, a face worked out row by row, contrast and a negative, on paper.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
The commands a printer understands, and pictures one bit per dot.
Talk to a receipt printer in its own bytes: text, line feeds, and ESC/POS commands for bold, centering, size, feeding and the paper sensor.
0 of 6 steps
Pictures for a print head: one bit per dot, eight dots to a byte, a 16 x 16 icon in 32 bytes, sent as a raster.
0 of 5 steps
A fortune button, a to-do printer and a photo booth of text.
One press, one ticket: a debounced arcade button, a numbered fortune, and a shuffled deck so no fortune repeats before all have been dealt.
0 of 4 steps
Keep a list in a two-dimensional char array, change it over serial, and print it as a checklist you can tick with a pen.
0 of 5 steps
Turn brightness into characters: a ten-step ramp from space to @, a face worked out row by row, contrast and a negative, on paper.
0 of 5 steps
Put it all together into one press that prints your day.
Put it all together: one press prints the day, a little weather picture, your to-do list and a fortune.
0 of 6 steps
All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Build receipt printer gadgets is part of the maker track, a ladder of courses from zero to expert.
Build a complete falling-blocks game on two 8x8 LED matrices: a field of sixteen bytes, seven pieces, quarter turns, line clears and levels.
Open the next courseFollow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the trackEvery lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 6 lessons of Build receipt printer gadgets are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 5 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Text and bitmaps and A tiny photo booth of text.
With "Printer commands", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.