All paths

Build a rhythm game

A rhythm game in three builds: notes that fall in time, buttons that judge your timing, then the whole game with combos and a high score.

Arduino Uno R3Free3 lessons3 h1 chapter913 XPMaker · Intermediate+150 XP

0 of 3 done

Start the course freeMake the notes fallBuild it as a kitRetails for about $51, free on Mokxi.Lesson plan for teachers
What you will build

One project, built step by step

3 lessons in 1 chapter, about 3 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

Play the rhythm game

Falling notes, lit buttons, timing windows, combos, a score on the LCD, a song on the piezo and a best score that EEPROM keeps.

Open it in the simulator
The map

Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

Lanes, buttons, game

Make notes fall to a song, judge a press to the millisecond, then play the whole game.

  1. Open205 XP

    Make the notes fall

    A 16 x 8 WS2812 panel becomes four lanes of falling notes, timed so each one lands on the bottom row exactly as the piezo plays it.

    0 of 5 steps

  2. Locked174 XP

    Hit the beat

    Four lit arcade buttons and a 16x2 LCD: press on the click and see perfect, good or miss, measured to the millisecond.

    0 of 4 steps

  3. ProjectLocked534 XP

    Play the rhythm game

    Falling notes, lit buttons, timing windows, combos, a score on the LCD, a song on the piezo and a best score that EEPROM keeps.

    0 of 7 steps

Syllabus

Every lesson in the course

All 3 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

Lanes, buttons, game

  1. Make the notes fallA 16 x 8 WS2812 panel becomes four lanes of falling notes, timed so each one lands on the bottom row exactly as the piezo plays it.
  2. Hit the beatFour lit arcade buttons and a 16x2 LCD: press on the click and see perfect, good or miss, measured to the millisecond.
  3. Play the rhythm gameFalling notes, lit buttons, timing windows, combos, a score on the LCD, a song on the piezo and a best score that EEPROM keeps.
Keep going

The next course on your track

Build a rhythm game is part of the maker track, a ladder of courses from zero to expert.

Next course

Build a science fair lie detector

Skin response and heart rate against a calm baseline: a science demo of the stress response, not a real lie detector.

Open the next course
Track

Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.

See every course on the track
Kits

Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

The kit for this course

Rhythm Game Kit

A falling-note LED panel, four lit buttons, a score screen and a piezo.

Open the kit
Have a kit already?

Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.

See every kit
Questions

About Build a rhythm game

Is Build a rhythm game free?

Yes. All 3 lessons of Build a rhythm game are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a rhythm game take?

About 3 hours: 3 lessons in 1 chapter, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Play the rhythm game.

Where do I start?

With "Make the notes fall", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.