Colors for zones
Swap the buzzer for a light you can read through a windshield: a stick of eight LEDs that shows green, yellow and red as the car comes in.
Open it in the simulatorA garage stop light from scratch: an ultrasonic sensor that measures with sound, LEDs that turn green, yellow and red, smoothing for messy echoes, sleep when the car is parked, and notes for mounting it for real.
0 of 6 done
6 lessons in 3 chapters, about 4 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
Swap the buzzer for a light you can read through a windshield: a stick of eight LEDs that shows green, yellow and red as the car comes in.
Open it in the simulatorA stop light that glows red all night wastes power and lights up the garage. Turn the LEDs off when the car has stopped, and back on when it moves.
Open it in the simulatorPut it all together: a light that guides the car in, flashes if you go too far, ignores a bad echo, and goes to sleep once you have parked.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
Distance from a chirp and an echo, then a stick of LEDs that shows it as zones.
An ultrasonic sensor measures distance like a bat: a chirp, an echo, and a stopwatch. Move the wall, read the distance, and move the stop line.
0 of 5 steps
Swap the buzzer for a light you can read through a windshield: a stick of eight LEDs that shows green, yellow and red as the car comes in.
0 of 5 steps
Averaging, a hold for missed echoes, and a light that sleeps when the car is parked.
Real echoes are messy: one bad reading and the light flickers. Average a few readings, ride out a missed echo, and find out what smoothing costs.
0 of 4 steps
A stop light that glows red all night wastes power and lights up the garage. Turn the LEDs off when the car has stopped, and back on when it moves.
0 of 4 steps
Where to mount it, what the cold does to sound, and the finished garage stop light.
Where the sensor goes decides whether it works: bumper height, aimed level, away from shelves. Plus a cold garage, where sound is slower and every reading is off.
0 of 4 steps
Put it all together: a light that guides the car in, flashes if you go too far, ignores a bad echo, and goes to sleep once you have parked.
0 of 4 steps
All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Build a parking assistant is part of the maker track, a ladder of courses from zero to expert.
A first robot with a real job: a servo hatch, meals on a clock, portions weighed by a load cell, a snack button with a ration, and a log of every meal.
Open the next courseFollow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the trackEvery lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
An Uno, an ultrasonic ranger, addressable RGB LEDs, a buzzer and an LED: a stop light that parks your car.
Open the kitPick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 6 lessons of Build a parking assistant are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 4 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Colors for zones, Sleep when empty and Project: a garage stop light.
With "Measure distance with sound", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.