Wave height from motion
Ride the swell: sample the vertical acceleration at 10 Hz, find each wave by its zero crossing, turn its acceleration into height, and report the significant wave height.
Open it in the simulatorBuild the buoy oceanographers moor in a bay: water temperature, significant wave height, position, solar power and compact LoRa telemetry.
0 of 6 done
6 lessons in 3 chapters, about 6 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
Ride the swell: sample the vertical acceleration at 10 Hz, find each wave by its zero crossing, turn its acceleration into height, and report the significant wave height.
Open it in the simulatorMeasure the panel with an INA219, do the buoy's power budget, and see why the duty cycle, not the battery, decides how long a buoy lives.
Open it in the simulatorThe whole buoy: a self-test, a wave record, a report, a real power-down sleep, and the rules a buoy lives by when it drifts or the sun goes.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
Water temperature, and wave height from motion alone.
Read the sea with a DS18B20 on OneWire, choose a resolution from the serial monitor, and see why every bit of precision costs time awake.
0 of 5 steps
Ride the swell: sample the vertical acceleration at 10 Hz, find each wave by its zero crossing, turn its acceleration into height, and report the significant wave height.
0 of 5 steps
A position, a watch circle, and a power budget.
Read the buoy's position from a NEO-6M with TinyGPS++, measure its distance from the mooring, and raise the alarm when it leaves its watch circle.
0 of 5 steps
Measure the panel with an INA219, do the buoy's power budget, and see why the duty cycle, not the battery, decides how long a buoy lives.
0 of 5 steps
Eighteen bytes over LoRa, then the whole bay buoy.
Pack temperature, waves, position and power into 18 binary bytes, send them over LoRa at spreading factor 9, and compare the airtime with the same report as text.
0 of 5 steps
The whole buoy: a self-test, a wave record, a report, a real power-down sleep, and the rules a buoy lives by when it drifts or the sun goes.
0 of 7 steps
All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Build an ocean data buoy is part of the maker track, a ladder of courses from zero to expert.
The inner solar system on four steppers, each arm where its planet really is: periods and J2000 longitudes, ratios in fixed point, hall sensor homing, a DS3231 for the date.
Open the next courseFollow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the trackEvery lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
An Uno, a LoRa module (SX1278, Ra-02), a GPS module (NEO-6M) and a temperature sensor (DS18B20): a buoy that reads the sea and reports home.
Open the kitPick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 6 lessons of Build an ocean data buoy are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 6 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Wave height from motion, Solar power and Project: a bay buoy.
With "Water temperature", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.