Recognizing spells
String flicks into spells with a tiny state machine and a pause that ends each one, look them up in a spellbook, and see how the big systems do it with dynamic time warping.
Open it in the simulatorA wand that turns flicks into spells: angles from an MPU6050, poses, a time window and a state machine that recognize spells, LED effects, an IR cast that opens a box, and a battery that lasts.
0 of 6 done
6 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
String flicks into spells with a tiny state machine and a pause that ends each one, look them up in a spellbook, and see how the big systems do it with dynamic time warping.
Open it in the simulatorA spell that leaves the wand: an NEC code flashed at 38 kHz through an infrared LED, decoded by the box, which opens its latch only for the right address and command.
Open it in the simulatorMake the box yours: a secret three-move spell to open it, a spell to lock it, and a wand that sleeps between uses.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
Angles from gravity, poses past a threshold, a window that tells a flick from a tilt, and spells from a spellbook.
An accelerometer in the wand’s tip feels which way is down. Turn that into angles, angles into poses, and tell a flick from a slow tilt with a time window.
0 of 5 steps
String flicks into spells with a tiny state machine and a pause that ends each one, look them up in a spellbook, and see how the big systems do it with dynamic time warping.
0 of 5 steps
Effects on eight WS2812 LEDs, a spell of your own, and an NEC code at 38 kHz that opens a servo latch.
Every spell needs a look: a white glow, darkness, a blue cast and a flickering fire on eight WS2812 LEDs, and a new spell of your own in the spellbook.
0 of 4 steps
A spell that leaves the wand: an NEC code flashed at 38 kHz through an infrared LED, decoded by the box, which opens its latch only for the right address and command.
0 of 4 steps
A LiPo read, budgeted and put to sleep, and a box that opens only for your secret spell.
A wand runs on a 500 mAh LiPo. Read the cell, budget the LEDs’ current, dim when the cell runs low, and sleep when nobody is casting.
0 of 5 steps
Make the box yours: a secret three-move spell to open it, a spell to lock it, and a wand that sleeps between uses.
0 of 4 steps
All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Build a gesture magic wand is part of the maker track, a ladder of courses from zero to expert.
Scan a keypad, write a real expression parser, add variables, and plot, zoom, trace and solve on a TFT.
Open the next courseFollow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the trackEvery lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 6 lessons of Build a gesture magic wand are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 5 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Recognizing spells, IR casting and Project: a spell that opens a box.
With "Motion as gestures", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.