All paths

Build a CubeSat flight computer

Bring up a 1U CubeSat on the bench: sensors, a real power budget, CCSDS telemetry, beacons, safe mode and a ground pass.

Arduino Uno R3Free7 lessons7 h3 chapters2,423 XPMaker · Advanced+250 XP

0 of 7 done

Start the course freeMission designBuild it as a kitRetails for about $88, free on Mokxi.Lesson plan for teachers
What you will build

3 projects, built step by step

7 lessons in 3 chapters, about 7 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

Power budget

Measure a real solar and battery circuit with an INA219, watch an eclipse, see why the blocking diode is there, and work out whether the satellite survives an orbit.

Open it in the simulator
Chapter 2 project

Beacon mode

Keep the 45 minutes of radio silence after deployment, unfold the antenna, beacon a callsign and health, and answer a ping from the ground.

Open it in the simulator
Chapter 3 project

Project: a ground pass

Fly the whole mission: deploy, beacon, log every ten minutes, ride out an eclipse in safe mode, then make contact and download the log as a pass report.

Open it in the simulator
The map

Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

The spacecraft

An orbit, the sensors that watch the cube, and the power that keeps it alive.

  1. Open250 XP

    Mission design

    Wake a CubeSat flight computer, find its sensors and radio on the bus, and work out an orbit from Kepler: period, speed, eclipse and how long it stays up.

    0 of 5 steps

  2. Locked250 XP

    Sensors

    Read housekeeping register by register: the temperature inside the cube against its limits, Earth's magnetic field, and the spin that says it is tumbling.

    0 of 5 steps

  3. ProjectLocked500 XP

    Power budget

    Measure a real solar and battery circuit with an INA219, watch an eclipse, see why the blocking diode is there, and work out whether the satellite survives an orbit.

    0 of 5 steps

5 questions, graded as you go.
Chapter 2

Talking to the ground

Frames with a sync marker and a CRC, then a beacon the ground can hear.

  1. Locked288 XP

    Telemetry frames

    Pack housekeeping into CCSDS-style frames with a sync marker, a sequence count and a CRC-16, send them down, and watch the ground station catch a flipped bit.

    0 of 6 steps

  2. ProjectLocked454 XP

    Beacon mode

    Keep the 45 minutes of radio silence after deployment, unfold the antenna, beacon a callsign and health, and answer a ping from the ground.

    0 of 5 steps

4 questions, graded as you go.
Chapter 3

Flight

Survive an eclipse in safe mode, then bring the log down in a pass.

  1. Locked227 XP

    Safe mode

    Fly into a long eclipse until the battery sags under 3.50 V, shed the payload, and come back only above 3.80 V: a mode machine with hysteresis.

    0 of 5 steps

  2. ProjectLocked454 XP

    Project: a ground pass

    Fly the whole mission: deploy, beacon, log every ten minutes, ride out an eclipse in safe mode, then make contact and download the log as a pass report.

    0 of 5 steps

3 questions, graded as you go.
Syllabus

Every lesson in the course

All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

The spacecraft

  1. Mission designWake a CubeSat flight computer, find its sensors and radio on the bus, and work out an orbit from Kepler: period, speed, eclipse and how long it stays up.
  2. SensorsRead housekeeping register by register: the temperature inside the cube against its limits, Earth's magnetic field, and the spin that says it is tumbling.
  3. Power budgetMeasure a real solar and battery circuit with an INA219, watch an eclipse, see why the blocking diode is there, and work out whether the satellite survives an orbit.
Chapter 2

Talking to the ground

  1. Telemetry framesPack housekeeping into CCSDS-style frames with a sync marker, a sequence count and a CRC-16, send them down, and watch the ground station catch a flipped bit.
  2. Beacon modeKeep the 45 minutes of radio silence after deployment, unfold the antenna, beacon a callsign and health, and answer a ping from the ground.
Chapter 3

Flight

  1. Safe modeFly into a long eclipse until the battery sags under 3.50 V, shed the payload, and come back only above 3.80 V: a mode machine with hysteresis.
  2. Project: a ground passFly the whole mission: deploy, beacon, log every ten minutes, ride out an eclipse in safe mode, then make contact and download the log as a pass report.
Keep going

The next course on your track

Build a CubeSat flight computer is part of the maker track, a ladder of courses from zero to expert.

Next course

Build a digital effects pedal

A guitar pedal on an Uno: bias and sampling, drive, a ring-buffer delay, tremolo, a swept wah, latency and a two-effect chain.

Open the next course
Track

Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.

See every course on the track
Kits

Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

The kit for this course

Small Satellite Flight Computer Kit

An Uno and a LoRa module (SX1278, Ra-02): a satellite that beacons, sleeps and survives an eclipse.

Open the kit
Have a kit already?

Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.

See every kit
Questions

About Build a CubeSat flight computer

Is Build a CubeSat flight computer free?

Yes. All 7 lessons of Build a CubeSat flight computer are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a CubeSat flight computer take?

About 7 hours: 7 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Power budget, Beacon mode and Project: a ground pass.

Where do I start?

With "Mission design", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.