All paths

Build a boat autopilot

A tiller pilot for the simulator: a tilt-compensated compass with declination, a limited rudder, a PID heading loop that knows 359 from 1 and ignores waves, and great-circle navigation to GPS waypoints. Never for real navigation.

Arduino Uno R3Free6 lessons7 h3 chapters2,052 XPRobotics · Advanced+250 XP

0 of 6 done

What you will build

3 projects, built step by step

6 lessons in 3 chapters, about 7 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.

Chapter 1 project

Tilt compensation

A sailboat heels. Tip a flat compass and the vertical field leaks into its reading. Heel 20 degrees and watch north read 329, then see how the accelerometer puts it back.

Open it in the simulator
Chapter 2 project

A PID heading loop

Close the loop: AUTO holds a course with a PID on the heading error. Turn to a new course, fall into the 359 to 1 trap and out of it, ride out a knock, and stop the rudder hunting in waves.

Open it in the simulator
Chapter 3 project

Project: hold a course

Sail the whole route, add a leg of your own, steer it from the knob, and write up the pilot with its limits.

Open it in the simulator
The map

Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

Which way is north

Heading from a three-axis compass, declination, and tilt compensation for a heeling boat.

  1. Open250 XP

    Heading from a compass

    An LSM303AGR measures the Earth’s field in three axes. Turn two of them into a heading with atan2, keep it in 0 to 360, and correct magnetic north to true north with the declination.

    0 of 5 steps

  2. ProjectLocked424 XP

    Tilt compensation

    A sailboat heels. Tip a flat compass and the vertical field leaks into its reading. Heel 20 degrees and watch north read 329, then see how the accelerometer puts it back.

    0 of 4 steps

4 questions, graded as you go.
Chapter 2

Steer

A rudder with limits, and a PID heading loop that wraps, recovers and does not hunt.

  1. Locked212 XP

    A rudder servo

    The rudder is a servo with limits: 30 degrees each way and 40 degrees a second. Steer by hand in standby, hit the stop, watch the modeled boat turn, and slow the rudder to a real ram’s speed.

    0 of 4 steps

  2. ProjectLocked576 XP

    A PID heading loop

    Close the loop: AUTO holds a course with a PID on the heading error. Turn to a new course, fall into the 359 to 1 trap and out of it, ride out a knock, and stop the rudder hunting in waves.

    0 of 6 steps

4 questions, graded as you go.
Chapter 3

Navigate

Great-circle distance and bearing to waypoints, then the whole route.

  1. Locked212 XP

    GPS waypoints

    From holding a heading to going somewhere. Get a fix, work out great-circle distance and bearing to a waypoint, steer to it, and switch to the next one inside an arrival radius.

    0 of 4 steps

  2. ProjectLocked378 XP

    Project: hold a course

    Sail the whole route, add a leg of your own, steer it from the knob, and write up the pilot with its limits.

    0 of 4 steps

3 questions, graded as you go.
Syllabus

Every lesson in the course

All 6 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

Which way is north

  1. Heading from a compassAn LSM303AGR measures the Earth’s field in three axes. Turn two of them into a heading with atan2, keep it in 0 to 360, and correct magnetic north to true north with the declination.
  2. Tilt compensationA sailboat heels. Tip a flat compass and the vertical field leaks into its reading. Heel 20 degrees and watch north read 329, then see how the accelerometer puts it back.
Chapter 2

Steer

  1. A rudder servoThe rudder is a servo with limits: 30 degrees each way and 40 degrees a second. Steer by hand in standby, hit the stop, watch the modeled boat turn, and slow the rudder to a real ram’s speed.
  2. A PID heading loopClose the loop: AUTO holds a course with a PID on the heading error. Turn to a new course, fall into the 359 to 1 trap and out of it, ride out a knock, and stop the rudder hunting in waves.
Chapter 3

Navigate

  1. GPS waypointsFrom holding a heading to going somewhere. Get a fix, work out great-circle distance and bearing to a waypoint, steer to it, and switch to the next one inside an arrival radius.
  2. Project: hold a courseSail the whole route, add a leg of your own, steer it from the knob, and write up the pilot with its limits.
Keep going

The next course on your track

Build a boat autopilot is part of the maker track, a ladder of courses from zero to expert.

Next course

Build a cornhole scoreboard

Big digits, team buttons, real cancellation scoring to 21, a radio remote on a second Uno and a fanfare for the winners.

Open the next course
Track

Maker track

Follow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.

See every course on the track
Kits

Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.

See every kit
Questions

About Build a boat autopilot

Is Build a boat autopilot free?

Yes. All 6 lessons of Build a boat autopilot are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Arduino Uno R3?

No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Build a boat autopilot take?

About 7 hours: 6 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

What will I build?

Each chapter ends in a project that puts it together: Tilt compensation, A PID heading loop and Project: hold a course.

Where do I start?

With "Heading from a compass", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.