Slot machine: one reel
Draw a spinning reel on an SSD1306 with no frame buffer, then let the lever pick where it stops. Animation that fits in an Uno.
Open it in the simulatorPull a real arcade lever, spin three OLED reels and pay out by a table whose odds you can check, on an Uno.
0 of 4 done
4 lessons in 2 chapters, about 4 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
Draw a spinning reel on an SSD1306 with no frame buffer, then let the lever pick where it stops. Animation that fits in an Uno.
Open it in the simulatorCoins, a bet, a pay table with odds you can check, win lights and sounds. The finished machine, and the math that keeps it honest.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
Read the lever once per pull, and draw a reel that spins.
A real arcade lever on an Uno. Read its DOWN switch, count each pull exactly once on its edge, and give it a click you can hear.
0 of 4 steps
Draw a spinning reel on an SSD1306 with no frame buffer, then let the lever pick where it stops. Animation that fits in an Uno.
0 of 4 steps
Three reels on three buses, then credits, bets and honest odds.
Three OLEDs with the same address, each on its own pair of wires, and reels that stop one by one from left to right.
0 of 4 steps
Coins, a bet, a pay table with odds you can check, win lights and sounds. The finished machine, and the math that keeps it honest.
0 of 6 steps
All 4 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Build a slot machine is part of the maker track, a ladder of courses from zero to expert.
From two flipper buttons to a full table with a kicker, lights, sound and a saved high score, on a Mega.
Open the next courseFollow the starter kit you already own, then build a claw machine, a balance bot, a handheld console or an LED cube, each a short course checked by the simulator.
See every course on the trackEvery lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
A pull lever, three screen reels, a light strip, a coin button and two bet buttons.
Open the kitPick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 4 lessons of Build a slot machine are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 4 hours: 4 lessons in 2 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Slot machine: one reel and Slot machine: the whole machine.
With "Slot machine: the lever", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.