Know your components lesson plan
Pick up any part and know what it is: resistor bands, capacitor codes, diodes and LEDs, transistor packages, pin 1 on a chip, SMD markings, and a mixed parts bin sorted into a working blinker.
Objectives and materials
By the end, students can
- Four bands, five bands, gold multipliers and the E12 series.
- uF, nF and pF, the three-digit code, tolerance letters and electrolytics.
- Stripes, long legs, forward volts and the LED's resistor.
- TO-92 and TO-220, mirror pinouts, NPN, PNP and MOSFETs.
- The notch and the dot, counting pins, and a datasheet for every chip.
- SMD codes, Zener numbers and diodes in mixed bags.
- Sort a bin, fix a blinker, make it yours.
Materials for the whole unit
- Capacitor x 4
- Component tester x 5
- DC voltage source x 2
- Diode x 2
- LED x 2
- LM358 dual op-amp
- MOSFET
- Multimeter
- NE555 timer
- Resistor x 8
- Slide switch
- Transistor (NPN or PNP) x 3
- Zener diode
Every part is already on the simulator’s bench, so there is nothing to buy or hand out. The counts are the most any one lesson uses, if you build it on real breadboards too.
Resistor color codes
Four bands, five bands, gold multipliers and the E12 series.
| Lesson | Time | What students do |
|---|---|---|
| Resistor color codesRead four-band and five-band resistors, the gold and silver multipliers, the tolerance band, and pick a real value for an LED, with a component tester checking every answer. | 40 min |
|
Materials
- Component tester x 3
- DC voltage source
- LED
- Resistor x 4
Check for understanding
Each student finishes "Resistor color codes" on their own, without opening the hints. The simulator checks 6 of its 6 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Pick a real value".
Capacitor codes
uF, nF and pF, the three-digit code, tolerance letters and electrolytics.
| Lesson | Time | What students do |
|---|---|---|
| Capacitor codesMicrofarads, nanofarads and picofarads, the three-digit code on ceramic caps, tolerance letters, electrolytic labels, and what to do when a part is too small for the tester. | 35 min |
|
Materials
- Capacitor x 4
- Component tester x 3
- Multimeter
Check for understanding
Each student finishes "Capacitor codes" on their own, without opening the hints. The simulator checks 5 of its 5 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Tolerance letters".
Diodes and LEDs
Stripes, long legs, forward volts and the LED's resistor.
| Lesson | Time | What students do |
|---|---|---|
| Diodes and LEDsFind the cathode by its stripe and an LED by its short leg, read forward voltage on a tester, tell silicon from Schottky, see why LED colors drop different volts, and set an LED's current. | 40 min |
|
Materials
- Component tester x 2
- DC voltage source x 2
- Diode x 2
- LED x 2
- Resistor x 2
Check for understanding
Each student finishes "Diodes and LEDs" on their own, without opening the hints. The simulator checks 6 of its 6 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Set the LED current".
Transistor packages
TO-92 and TO-220, mirror pinouts, NPN, PNP and MOSFETs.
| Lesson | Time | What students do |
|---|---|---|
| Transistor packagesTO-92 and TO-220, why the same shape hides different pinouts, NPN against PNP, a MOSFET in a transistor's clothes, and a transistor switching an LED. | 40 min |
|
Materials
- Component tester x 3
- DC voltage source
- LED
- MOSFET
- Resistor x 2
- Slide switch
- Transistor (NPN or PNP) x 3
Check for understanding
Each student finishes "Transistor packages" on their own, without opening the hints. The simulator checks 6 of its 6 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "The load sets the current".
ICs and pin 1
The notch and the dot, counting pins, and a datasheet for every chip.
| Lesson | Time | What students do |
|---|---|---|
| ICs and pin 1Find pin 1 by the notch and the dot, count around a DIP, power a 555 by its pin numbers, change its rate with a capacitor code, and learn why every chip needs its own datasheet. | 50 min |
|
Materials
- Capacitor
- DC voltage source
- LED x 2
- LM358 dual op-amp
- NE555 timer
- Resistor x 8
Check for understanding
Each student finishes "ICs and pin 1" on their own, without opening the hints. The simulator checks 7 of its 7 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "The comparator lights".
Part markings
SMD codes, Zener numbers and diodes in mixed bags.
| Lesson | Time | What students do |
|---|---|---|
| Part markingsSurface-mount resistor codes (103, 4R7, 4701), Zener part numbers that state their voltage, glass and black diodes by number, and how to read what little a tiny part says. | 50 min |
|
Materials
- Component tester x 4
- DC voltage source
- Diode
- Multimeter
- Resistor x 4
- Zener diode
Check for understanding
Each student finishes "Part markings" on their own, without opening the hints. The simulator checks 7 of its 7 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Glass or black: read the number".
Boss build
Sort a bin, fix a blinker, make it yours.
| Lesson | Time | What students do |
|---|---|---|
| Boss: sort a parts binFive unlabeled parts in five testers and a 555 blinker built from the wrong drawers: identify the bin, fix the transistor, the timing cap and the LED resistor, then make it blink faster in your own color. | 40 min |
|
Materials
- Capacitor x 2
- Component tester x 5
- DC voltage source
- Diode
- LED x 2
- NE555 timer
- Resistor x 5
- Transistor (NPN or PNP) x 2
Check for understanding
Each student finishes "Boss: sort a parts bin" on their own, without opening the hints. The simulator checks 6 of its 6 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Make it yours: the blue LED".
Teach this unit as a class
Start a class from this course and its 7 lessons are assigned in one go, in order. Students join with a six-character code or printed login cards, and each one’s work comes back to you.
The class tools are free for 30 days for one class of up to 20 students, with no card. The lessons themselves are free either way.