Heart, skin and body sensors lesson plan
Pulse and SpO2 from light, ECG beats, skin response, contactless temperature and fingerprints, the honest limits of all of them, then a fitness monitor. Learning projects, battery powered, never medical devices.
Objectives and materials
By the end, students can
- Pulse from light and beats from the skin.
- Skin response and contactless temperature.
- Fingerprints, and the limits of every body sensor.
- A fitness monitor.
Materials for the whole unit
- Arduino Uno R3
- Character LCD with I2C backpack
- Fingerprint sensor, R30x / AS608
- Full-size breadboard
- Galvanic skin response sensor
- Half breadboard
- Heart monitor (ECG), AD8232
- Hobby servo
- IR thermometer, MLX90614
- LED bar graph, 10 segments
- MAX30102 pulse oximeter
- OLED display, 128x64
- Piezo speaker
- Resistor x 10
- Traffic light module
Every part is already on the simulator’s bench, so there is nothing to buy or hand out. The counts are the most any one lesson uses, if you build it on real breadboards too.
Heart
Pulse from light and beats from the skin.
| Lesson | Time | What students do |
|---|---|---|
| Pulse and SpO2 from lightA MAX30102 shines red and infrared light into a fingertip: the steady level, the pulse riding on it, the heart rate in its rhythm and an SpO2 estimate from the two colors. | 55 min |
|
| ECG with the AD8232The heart’s electrical signal from three skin electrodes: R spikes found with a threshold and a refractory time, the R-R interval, electrodes checked, and why it runs on a battery. | 55 min |
|
Materials
- Arduino Uno R3
- Half breadboard
- Heart monitor (ECG), AD8232
- MAX30102 pulse oximeter
Check for understanding
Each student finishes "ECG with the AD8232" on their own, without opening the hints. The simulator checks 7 of its 7 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "A shorter refractory time".
Skin and body
Skin response and contactless temperature.
| Lesson | Time | What students do |
|---|---|---|
| GSR: skin responseA Grove GSR module in microsiemens: the slow tonic level, the quick responses on top of it, and an honest look at what skin response can and cannot say. | 45 min |
|
| MLX90614 contactless temperatureAn MLX90614 reads infrared glow without touching: the object and its own ambient, the field of view, a hot-surface warning, and why a forehead is not the inside of a body. | 45 min |
|
Materials
- Arduino Uno R3
- Character LCD with I2C backpack
- Full-size breadboard
- Galvanic skin response sensor
- Half breadboard
- IR thermometer, MLX90614
- LED bar graph, 10 segments
- Piezo speaker
- Resistor x 10
Check for understanding
Each student finishes "MLX90614 contactless temperature" on their own, without opening the hints. The simulator checks 6 of its 6 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Aim, spot and shine".
Identity and honesty
Fingerprints, and the limits of every body sensor.
| Lesson | Time | What students do |
|---|---|---|
| Fingerprint modulesAn optical fingerprint module with its own processor: templates kept on the module, a search that returns an ID and a confidence, an admin finger, and why fingerprints are not passwords. | 45 min |
|
| Honest medical limitsThe same oximeter with the rules a careful readout needs: no finger, no number; the settling window thrown away; numbers outside what the method can measure refused; and plain words about what it is. | 55 min |
|
Materials
- Arduino Uno R3
- Fingerprint sensor, R30x / AS608
- Half breadboard
- Hobby servo
- MAX30102 pulse oximeter
- Traffic light module
Check for understanding
Each student finishes "Honest medical limits" on their own, without opening the hints. The simulator checks 7 of its 7 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Your honest readout".
Boss
A fitness monitor.
| Lesson | Time | What students do |
|---|---|---|
| Boss: a fitness monitorA MAX30102 pulse, an MLX90614 skin temperature and an OLED showing the heart rate zone for a workout, with every honest rule from the course built in. | 55 min |
|
Materials
- Arduino Uno R3
- IR thermometer, MLX90614
- MAX30102 pulse oximeter
- OLED display, 128x64
Check for understanding
Each student finishes "Boss: a fitness monitor" on their own, without opening the hints. The simulator checks 7 of its 7 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Make it yours".
Teach this unit as a class
Start a class from this course and its 7 lessons are assigned in one go, in order. Students join with a six-character code or printed login cards, and each one’s work comes back to you.
The class tools are free for 30 days for one class of up to 20 students, with no card. The lessons themselves are free either way.