Build a smart beehive lesson plan
Build a hive monitor beekeepers can trust: weight trends, brood temperature, hive sound, a swarm watch and LoRa reports.
Objectives and materials
By the end, students can
- Weight and the brood nest's climate.
- Hive sound, and an alarm that needs two clues.
- Ten bytes over LoRa, then a season of data.
Materials for the whole unit
- Arduino Uno R3
- Full-size breadboard
- Function generator
- Load cell with HX711
- LoRa module, SX1278 (Ra-02)
- Temperature and humidity, SHT31
Every part is already on the simulator’s bench, so there is nothing to buy or hand out. The counts are the most any one lesson uses, if you build it on real breadboards too.
Read the hive
Weight and the brood nest's climate.
| Lesson | Time | What students do |
|---|---|---|
| Hive weightWeigh a whole beehive with load cells and an HX711, and read the trend: a nectar flow puts weight on, a swarm takes it off in minutes. | 50 min |
|
| Temperature and humidityPut an SHT31 in the brood box and read the colony's own thermostat: brood held near 34.5 C, whatever the weather. | 50 min |
|
Materials
- Arduino Uno R3
- Full-size breadboard
- Function generator
- Load cell with HX711
- LoRa module, SX1278 (Ra-02)
- Temperature and humidity, SHT31
Check for understanding
Each student finishes "Temperature and humidity" on their own, without opening the hints. The simulator checks 4 of its 4 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "No brood heat".
Listen for a swarm
Hive sound, and an alarm that needs two clues.
| Lesson | Time | What students do |
|---|---|---|
| Hive soundListen to a colony: the pitch from zero crossings, the level as RMS, and a careful watch on the band where young queens pipe. | 50 min |
|
| Swarm signsCombine two clues into one alarm: a weight drop of 1.5 kg in ten minutes, and piping heard in the last half hour. | 50 min |
|
Materials
- Arduino Uno R3
- Full-size breadboard
- Function generator
- Load cell with HX711
- LoRa module, SX1278 (Ra-02)
- Temperature and humidity, SHT31
Check for understanding
Each student finishes "Swarm signs" on their own, without opening the hints. The simulator checks 4 of its 4 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Both".
Report the season
Ten bytes over LoRa, then a season of data.
| Lesson | Time | What students do |
|---|---|---|
| LoRa reportsSend the hive's state home in ten bytes over LoRa: weight, brood temperature, humidity, sound and a report number. | 50 min |
|
| Project: a season of dataThe whole monitor: weight, brood climate, sound, the swarm watch and LoRa reports with the season so far. | 50 min |
|
Materials
- Arduino Uno R3
- Full-size breadboard
- Function generator
- Load cell with HX711
- LoRa module, SX1278 (Ra-02)
- Temperature and humidity, SHT31
Check for understanding
Each student finishes "Project: a season of data" on their own, without opening the hints. The simulator checks 4 of its 4 steps as they go.
Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Your apiary".
Teach this unit as a class
Start a class from this course and its 6 lessons are assigned in one go, in order. Students join with a six-character code or printed login cards, and each one’s work comes back to you.
The class tools are free for 30 days for one class of up to 20 students, with no card. The lessons themselves are free either way.