Interpolation
Turn the blocky 8x8 into a smooth 29x29 with bilinear interpolation in whole numbers, streamed a pixel at a time because the big picture would not fit in 2 KB, then compare nearest-pixel and change the scale.
Open it in the simulatorVision from raw sensor words on an Uno with 2 KB of RAM: images as grids, interpolation streamed a pixel at a time, thresholds, blobs, edges and tracking. Ends with a crew counter for a spaceship airlock.
0 of 7 done
7 lessons in 4 chapters, about 6 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
Turn the blocky 8x8 into a smooth 29x29 with bilinear interpolation in whole numbers, streamed a pixel at a time because the big picture would not fit in 2 KB, then compare nearest-pixel and change the scale.
Open it in the simulatorCount the crew in a mask with connected-component labeling: a flood fill with its own 64-byte stack, a test frame with a known answer, 4 against 8 neighbors, a size filter for noise, and a blob cut off by the edge.
Open it in the simulatorFollow each crew member from frame to frame: blob centers matched to tracks by distance, a direction from the motion, a gate that refuses a teleport, and patience for someone who drops out of view.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
An 8x8 frame in 128 bytes, then smooth it without the RAM to hold it.
A thermal camera sees sixty-four temperatures. Store them as quarter degrees in 128 bytes, find a pixel by row and column, shade the grid as text art, move the warm crew member, and mirror the picture.
0 of 6 steps
Turn the blocky 8x8 into a smooth 29x29 with bilinear interpolation in whole numbers, streamed a pixel at a time because the big picture would not fit in 2 KB, then compare nearest-pixel and change the scale.
0 of 6 steps
Thresholds that follow the room, then blobs you can count.
Split the frame into crew and background: a fixed threshold, why it breaks when the airlock warms up, a threshold that follows the room, and a difference test that also finds a crew member in a cold suit.
0 of 5 steps
Count the crew in a mask with connected-component labeling: a flood fill with its own 64-byte stack, a test frame with a known answer, 4 against 8 neighbors, a size filter for noise, and a blob cut off by the edge.
0 of 5 steps
Where the picture changes, then who went where.
Where the temperature changes: the Sobel filter in whole numbers, why the hottest pixel has no edge, why edges ignore the room temperature, an outline threshold, and a better cheap stand-in for the square root.
0 of 6 steps
Follow each crew member from frame to frame: blob centers matched to tracks by distance, a direction from the motion, a gate that refuses a teleport, and patience for someone who drops out of view.
0 of 6 steps
Count the crew in and out, and know when everyone is aboard.
The airlock crew counter: thresholds, blobs and tracks count crew in and out across a line, a dead band stops a hesitant crew member being counted three times, and the hatch knows when everyone is aboard.
0 of 6 steps
All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 7 lessons of Image processing on a thermal camera are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 6 hours: 7 lessons in 4 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Interpolation, Blobs and Tracking.
With "Images as grids", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.