A doorbell
Read a button, ring a ding dong on the buzzer, light a lamp while it rings and count every visitor.
Open it in the simulatorLamps, a doorbell, a night light, a reaction game, a traffic light, a fan and an alarm for your room, all on one bench.
0 of 7 done
7 lessons in 3 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
Read a button, ring a ding dong on the buzzer, light a lamp while it rings and count every visitor.
Open it in the simulatorBuild a reaction game: a surprise wait, a green lamp and a beep, your time in milliseconds, a too-soon rule and a record to beat.
Open it in the simulatorPut it all together: arm the alarm, leave in five seconds, and a change in the light sets off a flashing, beeping intruder alert.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
Light a lamp, learn why it needs a resistor, and build a doorbell.
Your first sketch: switch a lamp on, make another one blink, and find out why every lamp needs a resistor.
0 of 4 steps
Read a button, ring a ding dong on the buzzer, light a lamp while it rings and count every visitor.
0 of 5 steps
A lamp that knows when it is dark, and a game that times you.
Measure light with a light sensor and a divider, see the number change, and switch on a lamp by itself when the room gets dark.
0 of 4 steps
Build a reaction game: a surprise wait, a green lamp and a beep, your time in milliseconds, a too-soon rule and a record to beat.
0 of 5 steps
A traffic light, a spinning fan and an alarm to guard your room.
Run red, yellow and green in the right order and timing, and add a walk button that beeps for people crossing.
0 of 5 steps
Make something move: a fan module with its own driver chip, a button that steps it from off to slow to fast, and analogWrite() for speed.
0 of 5 steps
Put it all together: arm the alarm, leave in five seconds, and a change in the light sets off a flashing, beeping intruder alert.
0 of 7 steps
All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
An Uno, a fan module (L9110), a light sensor, a pushbutton and an LED: doorbells, night lights, games and a room alarm.
Open the kitPick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 7 lessons of First inventions (ages 8 to 12) are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 5 hours: 7 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: A doorbell, A buzzer game and Project: an alarm for your room.
With "Light a lamp", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.