Sequences
A machine cycle is a state machine: one state at a time, a sensor to leave each one, and a timer that says something is wrong. Run a full cycle, then break it on purpose.
Open it in the simulatorHow a robotics and automation technician runs a cell: conveyors and sensors, sequences as state machines, sorting stations, interlocks and permissives, an HMI with alarm acknowledge, e-stop and fault recovery, and a sorting line to run.
0 of 7 done
7 lessons in 3 chapters, about 7 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
A machine cycle is a state machine: one state at a time, a sensor to leave each one, and a timer that says something is wrong. Run a full cycle, then break it on purpose.
Open it in the simulatorPermissives decide whether a machine may start; interlocks stop it when a condition fails while it runs. Meet both on the sorting cell, with a start-up warning and a guard door.
Open it in the simulatorConfigure the cell for a production run: batches that stop on their own, a tighter starve timeout, and a full shift with an e-stop in the middle.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
A bottling line walked input by input, then its cycle as a state machine with timeouts for jams and starving.
A bottling line: a belt on a relay, an IR eye that sees each bottle arrive, a float that says full, and a guard on the door. Meet every input and output the way a technician does, one at a time.
0 of 5 steps
A machine cycle is a state machine: one state at a time, a sensor to leave each one, and a timer that says something is wrong. Run a full cycle, then break it on purpose.
0 of 5 steps
A color sorting station that measures, decides and confirms, then permissives and interlocks on a sorting cell.
A color sensor and a diverter: measure, classify against references, route each part to its bin, and confirm it got there.
0 of 5 steps
Permissives decide whether a machine may start; interlocks stop it when a condition fails while it runs. Meet both on the sorting cell, with a start-up warning and a guard door.
0 of 4 steps
An HMI with alarm acknowledge, the e-stop and its reset, a starved line brought back, and a production run.
The operator’s window into the cell: a state on the display, lamps that mean one thing each, a count, and an alarm that blinks until someone acknowledges it.
0 of 4 steps
An e-stop, its reset and a restart; a starved line, a refill and a restart. Getting a cell back running safely is most of a technician’s day.
0 of 5 steps
Configure the cell for a production run: batches that stop on their own, a tighter starve timeout, and a full shift with an e-stop in the middle.
0 of 4 steps
All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 7 lessons of Factory automation systems are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 7 hours: 7 lessons in 3 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Sequences, Interlocks and permissives and Boss: a sorting line.
With "Conveyors and sensors", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.