Full and partial refresh
A press counter: a partial refresh of one strip in a fraction of a second, the ghosts it leaves, and a full refresh every fifth update to clean them.
Open it in the simulatorE-paper on the Uno with GxEPD2: how e-ink holds a picture with no power, full and partial refresh, two-color layouts, paged drawing, fonts and icons, sleeping between updates, and an ISS pass badge for the boss.
0 of 7 done
7 lessons in 4 chapters, about 5 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
A press counter: a partial refresh of one strip in a fraction of a second, the ghosts it leaves, and a full refresh every fifth update to clean them.
Open it in the simulatorA weather card: GFX fonts that draw from a baseline, getTextBounds() to center a reading, and a sun and a cloud from 16x16 bitmaps.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
Particles that stay put, and the two kinds of refresh.
Charged particles in oil: a picture that needs power only to change. One full refresh with BUSY high for two seconds, then deep sleep and the picture stays.
0 of 6 steps
A press counter: a partial refresh of one strip in a fraction of a second, the ghosts it leaves, and a full refresh every fifth update to clean them.
0 of 6 steps
Black and white layouts, pages, fonts and icons.
A mission status card in pure black and white: an inverted title band, boxes, a progress bar and a dotted line, all placed from width() and height() so it survives a rotation.
0 of 5 steps
A 4000-byte picture on a board with 2048 bytes of RAM: GxEPD2 draws it in pages, the do/while loop runs once per page, and a bigger buffer means fewer passes.
0 of 5 steps
A weather card: GFX fonts that draw from a baseline, getTextBounds() to center a reading, and a sun and a cloud from 16x16 bitmaps.
0 of 5 steps
Wake, draw, sleep, and the power budget.
A sensor display on a timer: wake, draw with a partial refresh, hibernate, and work out how long a battery lasts when the screen costs nothing between updates.
0 of 5 steps
A badge that says when to look up for the space station.
A 2.9 inch badge that counts down to the next pass of the space station: a mission patch, partial updates every minute with a full one every sixth, a details page on a button, and sleep between.
0 of 7 steps
All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 7 lessons of E-paper displays are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 5 hours: 7 lessons in 4 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Full and partial refresh and Fonts and icons.
With "How e-ink holds an image", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.