All paths

Electrician math with Python

The arithmetic of the trade as Python programs on a Raspberry Pi: Ohm's and Watt's laws, voltage drop, conduit fill, box fill, a load calculation, motor tables, and a job calculator you build and extend.

Raspberry Pi 4 Model BFree7 lessons5 h7 chapters1,559 XPElectrical · Intermediate+150 XP

0 of 7 done

Start the course freeOhm's and Watt's laws in PythonLesson plan for teachers
What you will build

0 projects, built step by step

7 lessons in 7 chapters, about 5 hours on a simulated Raspberry Pi 4 Model B. Free, in your browser, every step checked by the simulator.

The map

Chapter by chapter

Each lesson opens when the one before it is done, and each chapter ends in a project.

Chapter 1

Ohm's and Watt's laws

Two laws as functions, and a breaker picked at 125 percent.

  1. Open236 XP

    Ohm's and Watt's laws in Python

    Turn I = V / R and P = V x I into Python functions, size a 1500 W heater at 120 and 240 V, find its element's resistance, and pick its breaker with the 125 percent rule.

    0 of 6 steps

3 questions, graded as you go.
Chapter 2

Voltage drop

The K formula, the 3 percent check and the longest run.

  1. Locked236 XP

    Voltage drop in Python

    The electrician's VD = 2KIL / CM formula as a function, the 3 percent recommendation as an if, a loop that finds the smallest wire that meets it, 240 V against 120 V, and the longest run a wire allows.

    0 of 6 steps

3 questions, graded as you go.
Chapter 3

Conduit fill

Chapter 9 areas and the 40, 31 and 53 percent rules.

  1. Locked205 XP

    Conduit fill in Python

    Add up THHN conductor areas from NEC Chapter 9 Table 5, compare them with 40 percent of EMT's area from Table 4, let a function pick the trade size, mix gauges, and code the one- and two-wire rules.

    0 of 5 steps

3 questions, graded as you go.
Chapter 4

Box fill

Allowances, volumes and the smallest box that fits.

  1. Locked205 XP

    Box fill in Python

    Count conductor allowances the NEC 314.16 way with a function and keyword arguments, compare with a box's volume, see what 12 AWG costs, and let a list of boxes pick the smallest that fits.

    0 of 5 steps

3 questions, graded as you go.
Chapter 5

Load calculation

Volt-amps, demand factors and the service size.

  1. Locked205 XP

    Load calculation in Python

    A simplified dwelling load calculation as a program: volt-amps per square foot, kitchen and laundry circuits, the demand factor as a function, fixed appliances from a dict, the service size, and what an EV charger does to it.

    0 of 5 steps

3 questions, graded as you go.
Chapter 6

Motor tables

Table FLC, 125 percent wire, 250 percent breakers.

  1. Locked236 XP

    Motor tables in Python

    Look up a motor's full-load current from NEC Table 430.248 with a tuple-keyed dict, size its conductors at 125 percent, its overload from the nameplate, its breaker at up to 250 percent, and handle a motor the table does not have.

    0 of 6 steps

3 questions, graded as you go.
Chapter 7

Boss build

A command-line job calculator on the Pi.

  1. Locked236 XP

    Boss: a job calculator

    Put the course in one Python program: a command-line calculator on the Pi that reads commands typed in the Serial Monitor for voltage drop, conduit fill, box fill and motor circuits, survives bad input, and takes a new command you add yourself.

    0 of 6 steps

3 questions, graded as you go.
Syllabus

Every lesson in the course

All 7 lessons, in order, each with what it covers. Any of them opens in the editor right away.

Chapter 1

Ohm's and Watt's laws

  1. Ohm's and Watt's laws in PythonTurn I = V / R and P = V x I into Python functions, size a 1500 W heater at 120 and 240 V, find its element's resistance, and pick its breaker with the 125 percent rule.
Chapter 2

Voltage drop

  1. Voltage drop in PythonThe electrician's VD = 2KIL / CM formula as a function, the 3 percent recommendation as an if, a loop that finds the smallest wire that meets it, 240 V against 120 V, and the longest run a wire allows.
Chapter 3

Conduit fill

  1. Conduit fill in PythonAdd up THHN conductor areas from NEC Chapter 9 Table 5, compare them with 40 percent of EMT's area from Table 4, let a function pick the trade size, mix gauges, and code the one- and two-wire rules.
Chapter 4

Box fill

  1. Box fill in PythonCount conductor allowances the NEC 314.16 way with a function and keyword arguments, compare with a box's volume, see what 12 AWG costs, and let a list of boxes pick the smallest that fits.
Chapter 5

Load calculation

  1. Load calculation in PythonA simplified dwelling load calculation as a program: volt-amps per square foot, kitchen and laundry circuits, the demand factor as a function, fixed appliances from a dict, the service size, and what an EV charger does to it.
Chapter 6

Motor tables

  1. Motor tables in PythonLook up a motor's full-load current from NEC Table 430.248 with a tuple-keyed dict, size its conductors at 125 percent, its overload from the nameplate, its breaker at up to 250 percent, and handle a motor the table does not have.
Chapter 7

Boss build

  1. Boss: a job calculatorPut the course in one Python program: a command-line calculator on the Pi that reads commands typed in the Serial Monitor for voltage drop, conduit fill, box fill and motor circuits, survives bad input, and takes a new command you add yourself.
Kits

Build it on your bench too

Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.

Have a kit already?

Find your kit

Pick the starter kit you own and run every lesson in its manual with the same parts on the same pins.

See every kit
Questions

About Electrician math with Python

Is Electrician math with Python free?

Yes. All 7 lessons of Electrician math with Python are free and run in your browser, with nothing to install and no parts to buy before you start.

Do I need a real Raspberry Pi 4 Model B?

No. Every lesson runs on a simulated Raspberry Pi 4 Model B with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.

How long does Electrician math with Python take?

About 5 hours: 7 lessons in 7 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.

Where do I start?

With "Ohm's and Watt's laws in Python", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.