Build 2: a sleigh-bell doorbell
Press the doorbell and a servo shakes real sleigh bells while a speaker plays Jingle Bells. A tune as two arrays, tone(), and a servo that keeps the beat.
Open it in the simulatorFour holiday builds on the Uno, from a star on the tree to a light show synced to a song, each one ready to hang up.
0 of 4 done
4 lessons in 2 chapters, about 4 hours on a simulated Arduino Uno R3. Free, in your browser, every step checked by the simulator.
Press the doorbell and a servo shakes real sleigh bells while a speaker plays Jingle Bells. A tune as two arrays, tone(), and a servo that keeps the beat.
Open it in the simulatorA DFPlayer plays the song and three LED strips follow a cue list timed in beats. How synced shows really work, what xLights does at a larger scale, and what this sketch does by hand.
Open it in the simulatorEach lesson opens when the one before it is done, and each chapter ends in a project.
Light a star on one data wire and ring real bells from a doorbell.
A ring of 16 WS2812B LEDs behind a star cutout, with four shows a button steps through. How one data wire drives every LED, and how to draw a frame without delay().
0 of 4 steps
Press the doorbell and a servo shakes real sleigh bells while a speaker plays Jingle Bells. A tune as two arrays, tone(), and a servo that keeps the beat.
0 of 4 steps
Count down to Christmas from a real-time clock, then sync three strips to a song.
A DS3231 keeps the date and an eight-digit MAX7219 display counts down to Christmas morning. Why a real-time clock beats millis(), and date arithmetic with DateTime.
0 of 4 steps
A DFPlayer plays the song and three LED strips follow a cue list timed in beats. How synced shows really work, what xLights does at a larger scale, and what this sketch does by hand.
0 of 5 steps
Finish every lesson and Mokxi issues a certificate with your name, verified on its own page.
Certificate of Completion
This is to certify that
Your Name
has successfully completed the course
Build Christmas lights
Covering the tree and the door and The window and the roof.
4 lessons · about 4 hours of study
Finish the course and earn a verifiable certificate with your name, a QR code and a link for LinkedIn. Certificates come with Pro, and the 7-day trial is free.
All 4 lessons, in order, each with what it covers. Any of them opens in the editor right away.
Every lesson runs in the simulator with nothing to buy. When you want the real thing, these kits have the parts.
A tree star, a sleigh-bell doorbell, a window countdown and a light show set to music.
Open the kitPick the starter kit you own and run every lesson in its manual with the same parts on the same pins.
See every kitYes. All 4 lessons of Build Christmas lights are free and run in your browser, with nothing to install and no parts to buy before you start.
No. Every lesson runs on a simulated Arduino Uno R3 with its parts on the canvas, and the simulator checks each step as you go. When you want to build it for real, the same wiring and code work on a real board.
About 4 hours: 4 lessons in 2 chapters, each one a few short steps. Your progress is kept, so you can stop after any lesson and pick up where you left off.
Each chapter ends in a project that puts it together: Build 2: a sleigh-bell doorbell and Build 4: a light show synced to music.
With "Build 1: a tree topper star", and each lesson builds on the one before it. New to circuits? Electronics basics is the course that starts from zero.