Source: https://mokxi.com/teachers/plans/health-and-biometric-sensors
Updated: 2026-11-19

Lesson plan

# Heart, skin and body sensors lesson plan

Pulse and SpO2 from light, ECG beats, skin response, contactless temperature and fingerprints, the honest limits of all of them, then a fitness monitor. Learning projects, battery powered, never medical devices.

4 chapters, 7 lessons, about 6 hours, on the Arduino Uno R3. Every lesson runs in the browser, with nothing to install.

Start a class from this course

The unit

## Objectives and materials

### By the end, students can

- Pulse from light and beats from the skin.
- Skin response and contactless temperature.
- Fingerprints, and the limits of every body sensor.
- A fitness monitor.

### Materials for the whole unit

- Arduino Uno R3
- Character LCD with I2C backpack
- Fingerprint sensor, R30x / AS608
- Full-size breadboard
- Galvanic skin response sensor
- Half breadboard
- Heart monitor (ECG), AD8232
- Hobby servo
- IR thermometer, MLX90614
- LED bar graph, 10 segments
- MAX30102 pulse oximeter
- OLED display, 128x64
- Piezo speaker
- Resistor x 10
- Traffic light module

Every part is already on the simulator’s bench, so there is nothing to buy or hand out. The counts are the most any one lesson uses, if you build it on real breadboards too.

Chapter 1. About 1 h 50 min

## Heart

Pulse from light and beats from the skin.

Lesson | Time | What students do

Pulse and SpO2 from light A MAX30102 shines red and infrared light into a fingertip: the steady level, the pulse riding on it, the heart rate in its rhythm and an SpO2 estimate from the two colors. | 55 min

- Run it: light through a finger
- A big level, a small swing
- Heart rate and SpO2
- A faster heart
- Two colors for oxygen
- Lift the finger
- A threshold is a guess

ECG with the AD8232 The heart’s electrical signal from three skin electrodes: R spikes found with a threshold and a refractory time, the R-R interval, electrodes checked, and why it runs on a battery. | 55 min

- Run it: beats from the skin
- Find the R spike
- A faster heart
- Leads off
- Noise
- Too fast for the window
- A shorter refractory time

### Materials

- Arduino Uno R3
- Half breadboard
- Heart monitor (ECG), AD8232
- MAX30102 pulse oximeter

### Check for understanding

Each student finishes "ECG with the AD8232" on their own, without opening the hints. The simulator checks 7 of its 7 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "A shorter refractory time".

Chapter 2. About 1 h 30 min

## Skin and body

Skin response and contactless temperature.

Lesson | Time | What students do

GSR: skin response A Grove GSR module in microsiemens: the slow tonic level, the quick responses on top of it, and an honest look at what skin response can and cannot say. | 45 min

- Run it: fingers on the straps
- A response
- Settle back
- Hands off
- Smaller responses
- What GSR cannot say

MLX90614 contactless temperature An MLX90614 reads infrared glow without touching: the object and its own ambient, the field of view, a hot-surface warning, and why a forehead is not the inside of a body. | 45 min

- Run it: two temperatures
- A warm room
- Skin is not the core
- Do not touch
- A lower warning
- Aim, spot and shine

### Materials

- Arduino Uno R3
- Character LCD with I2C backpack
- Full-size breadboard
- Galvanic skin response sensor
- Half breadboard
- IR thermometer, MLX90614
- LED bar graph, 10 segments
- Piezo speaker
- Resistor x 10

### Check for understanding

Each student finishes "MLX90614 contactless temperature" on their own, without opening the hints. The simulator checks 6 of its 6 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Aim, spot and shine".

Chapter 3. About 1 h 40 min

## Identity and honesty

Fingerprints, and the limits of every body sensor.

Lesson | Time | What students do

Fingerprint modules An optical fingerprint module with its own processor: templates kept on the module, a search that returns an ID and a confidence, an admin finger, and why fingerprints are not passwords. | 45 min

- Run it: the sensor reports in
- A match
- Another finger
- A stranger
- A new admin
- Fingerprints are not passwords

Honest medical limits The same oximeter with the rules a careful readout needs: no finger, no number; the settling window thrown away; numbers outside what the method can measure refused; and plain words about what it is. | 55 min

- Run it: say what it is
- Why throw it away
- No finger, no number
- Outside what it can measure
- Low oxygen readings
- See what the rule hides
- Your honest readout

### Materials

- Arduino Uno R3
- Fingerprint sensor, R30x / AS608
- Half breadboard
- Hobby servo
- MAX30102 pulse oximeter
- Traffic light module

### Check for understanding

Each student finishes "Honest medical limits" on their own, without opening the hints. The simulator checks 7 of its 7 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Your honest readout".

Chapter 4. About 55 min

## Boss

A fitness monitor.

Lesson | Time | What students do

Boss: a fitness monitor A MAX30102 pulse, an MLX90614 skin temperature and an OLED showing the heart rate zone for a workout, with every honest rule from the course built in. | 55 min

- Run it: three parts, one bus
- Settle, then the zone
- Work out
- Skin temperature
- Finger off
- Your age
- Make it yours

### Materials

- Arduino Uno R3
- IR thermometer, MLX90614
- MAX30102 pulse oximeter
- OLED display, 128x64

### Check for understanding

Each student finishes "Boss: a fitness monitor" on their own, without opening the hints. The simulator checks 7 of its 7 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Make it yours".

Your class

## Teach this unit as a class

Start a class from this course and its 7 lessons are assigned in one go, in order. Students join with a six-character code or printed login cards, and each one’s work comes back to you.

The class tools are free for 30 days for one class of up to 20 students, with no card. The lessons themselves are free either way.

Start a class from this course See the demo class

More units

## Other lesson plans

Electronics basics 20 lessons, about 10 h. Embedded on the Arduino Uno 16 lessons, about 12 h. Embedded on the ESP32-C3 13 lessons, about 11 h. Embedded on the Raspberry Pi Pico 7 lessons, about 6 h. Build your own fight stick 5 lessons, about 4 h. Embedded on the STM32F411 6 lessons, about 6 h. C++ on a board 13 lessons, about 10 h. Digital logic and memory 4 lessons, about 4 h. Interactive devices on the Uno 9 lessons, about 8 h. From gates to a computer 23 lessons, about 16 h. Build a claw machine 8 lessons, about 6 h. Every unit All the courses as ready-made units, on the teachers page.
