Source: https://mokxi.com/teachers/plans/epaper-displays
Updated: 2026-11-19

Lesson plan

# E-paper displays lesson plan

E-paper on the Uno with GxEPD2: how e-ink holds a picture with no power, full and partial refresh, two-color layouts, paged drawing, fonts and icons, sleeping between updates, and an ISS pass badge for the boss.

4 chapters, 7 lessons, about 5 hours, on the Arduino Uno R3. Every lesson runs in the browser, with nothing to install.

Start a class from this course

The unit

## Objectives and materials

### By the end, students can

- Particles that stay put, and the two kinds of refresh.
- Black and white layouts, pages, fonts and icons.
- Wake, draw, sleep, and the power budget.
- A badge that says when to look up for the space station.

### Materials for the whole unit

- Arduino Uno R3
- E-paper display, 2.9 inch
- E-paper display, SSD1680 2.13 inch
- Half breadboard
- Pushbutton

Every part is already on the simulator’s bench, so there is nothing to buy or hand out. The counts are the most any one lesson uses, if you build it on real breadboards too.

Chapter 1. About 1 h 30 min

## How e-paper works

Particles that stay put, and the two kinds of refresh.

Lesson | Time | What students do

How e-ink holds an image Charged particles in oil: a picture that needs power only to change. One full refresh with BUSY high for two seconds, then deep sleep and the picture stays. | 45 min

- Run it: a lunar base
- Particles in oil
- BUSY: wait for the particles
- Switch it off
- Draw it twice
- Where e-paper wins

Full and partial refresh A press counter: a partial refresh of one strip in a fraction of a second, the ghosts it leaves, and a full refresh every fifth update to clean them. | 45 min

- Run it: a press counter
- A partial refresh
- Ghosts
- The refresh count
- Clean more often
- Choosing a refresh

### Materials

- Arduino Uno R3
- E-paper display, SSD1680 2.13 inch
- Half breadboard
- Pushbutton

### Check for understanding

Each student finishes "Full and partial refresh" on their own, without opening the hints. The simulator checks 6 of its 6 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Choosing a refresh".

Chapter 2. About 2 h

## Drawing for paper

Black and white layouts, pages, fonts and icons.

Lesson | Time | What students do

Two-color layout A mission status card in pure black and white: an inverted title band, boxes, a progress bar and a dotted line, all placed from width() and height() so it survives a rotation. | 40 min

- Run it: a mission card
- Contrast does the work
- A bar from a number
- Turn it upright
- Design for distance

Pages: a picture bigger than RAM A 4000-byte picture on a board with 2048 bytes of RAM: GxEPD2 draws it in pages, the do/while loop runs once per page, and a bigger buffer means fewer passes. | 40 min

- Run it: a rocket in pages
- Bigger than the memory
- Why the code must draw everything
- A bigger buffer
- Pages everywhere

Fonts and icons A weather card: GFX fonts that draw from a baseline, getTextBounds() to center a reading, and a sun and a cloud from 16x16 bitmaps. | 40 min

- Run it: a weather card
- Fonts sit on a baseline
- Measure, then center
- Weather on Mars
- Icons are bitmaps

### Materials

- Arduino Uno R3
- E-paper display, SSD1680 2.13 inch
- Half breadboard
- Pushbutton

### Check for understanding

Each student finishes "Fonts and icons" on their own, without opening the hints. The simulator checks 5 of its 5 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Icons are bitmaps".

Chapter 3. About 40 min

## Living on a battery

Wake, draw, sleep, and the power budget.

Lesson | Time | What students do

Sleep between updates A sensor display on a timer: wake, draw with a partial refresh, hibernate, and work out how long a battery lasts when the screen costs nothing between updates. | 40 min

- Run it: a sensor node
- Wake, draw, sleep
- The power budget
- Update less often
- The board sleeps too

### Materials

- Arduino Uno R3
- E-paper display, SSD1680 2.13 inch
- Half breadboard
- Pushbutton

### Check for understanding

Each student finishes "Sleep between updates" on their own, without opening the hints. The simulator checks 5 of its 5 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "The board sleeps too".

Chapter 4. About 55 min

## Boss project

A badge that says when to look up for the space station.

Lesson | Time | What students do

Boss: an ISS pass badge A 2.9 inch badge that counts down to the next pass of the space station: a mission patch, partial updates every minute with a full one every sixth, a details page on a button, and sleep between. | 55 min

- Run it: the ISS pass badge
- A patch from shapes
- Minute by minute
- Pass details
- Clean every sixth
- Look up!
- Make it your badge

### Materials

- Arduino Uno R3
- E-paper display, 2.9 inch
- Half breadboard
- Pushbutton

### Check for understanding

Each student finishes "Boss: an ISS pass badge" on their own, without opening the hints. The simulator checks 7 of its 7 steps as they go.

Then ask each one to explain, in a sentence or two, the last thing it asked of them: "Make it your badge".

Your class

## Teach this unit as a class

Start a class from this course and its 7 lessons are assigned in one go, in order. Students join with a six-character code or printed login cards, and each one’s work comes back to you.

The class tools are free for 30 days for one class of up to 20 students, with no card. The lessons themselves are free either way.

Start a class from this course See the demo class

More units

## Other lesson plans

Electronics basics 20 lessons, about 10 h. Embedded on the Arduino Uno 16 lessons, about 12 h. Embedded on the ESP32-C3 13 lessons, about 11 h. Embedded on the Raspberry Pi Pico 7 lessons, about 6 h. Build your own fight stick 5 lessons, about 4 h. Embedded on the STM32F411 6 lessons, about 6 h. C++ on a board 13 lessons, about 10 h. Digital logic and memory 4 lessons, about 4 h. Interactive devices on the Uno 9 lessons, about 8 h. From gates to a computer 23 lessons, about 16 h. Build a claw machine 8 lessons, about 6 h. Every unit All the courses as ready-made units, on the teachers page.
